On 30/06/2024 16:17, Laurent Pinchart wrote: > Add device tree binding for the onsemi AR0144 CMOS camera sensor. The > binding supports both the monochrome and color sensor versions. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > .../bindings/media/i2c/onnn,ar0144.yaml | 166 ++++++++++++++++++ > MAINTAINERS | 6 + > 2 files changed, 172 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,ar0144.yaml > > + > +allOf: > + - $ref: /schemas/media/video-interface-devices.yaml# > + > +properties: > + compatible: > + enum: > + - onnn,ar0144c # Color version > + - onnn,ar0144m # Monochrome version > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + const: extclk This seems redundant. Drop clock-names. > + > + vaa-supply: > + description: > + Supply for the VAA and VAA_PIX analog power rails (2.8V). > + > + vdd-supply: > + description: > + Supply for the VDD and VDD_PHY digital power rails (1.2V). > + > + vdd_io-supply: No underscores. > + description: > + Supply for the VDD_IO digital I/O power rail (1.8V or 2.8V). > + > + reset-gpios: > + description: Reset GPIO, active low. > + maxItems: 1 > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: | Do not need '|' unless you need to preserve formatting. Best regards, Krzysztof
