On 1/07/24 11:43, Chris Packham wrote: > > On 28/06/24 02:42, Rob Herring wrote: >> On Wed, Jun 26, 2024 at 10:33 PM Chris Packham >> <chris.packham@xxxxxxxxxxxxxxxxxxx> wrote: >>> This series adds basic support for the RTL9302C reference board. >>> Currently the >>> focus is on the CPU block stuff. I hope to get around to the DSA >>> switch driver >>> eventually but this is a small start that lets me boot a mainline >>> kernel on the >>> board I have. I initialiy started with code from openwrt but have >>> paired it >>> down to just the clocksource driver and devicetree. >> Your emails are being sent as quoted-printable encoding which is >> generally preferred to be avoided on maillists (as is base64). >> git-send-email should normally use 8-bit encoding, but the man page >> indicates QP may be used if there are carriage returns (there >> shouldn't be). > > Hmm here's the output from when I sent this series. > > Subject: [PATCH v3 0/9] mips: Support for RTL9302C > Date: Thu, 27 Jun 2024 16:33:08 +1200 > Message-ID: <20240627043317.3751996-1-chris.packham@xxxxxxxxxxxxxxxxxxx> > X-Mailer: git-send-email 2.45.2 > MIME-Version: 1.0 > Content-Transfer-Encoding: 8bit > > All the patches are also 8bit. So I think git chose the right thing. > > I do keep needing to convince Thunderbird to send my replies as plain > text. Occasionally I forget and vger complains at me. I did a bit of digging. My replies are indeed being sent as quoted-printable and get base64 encoded by the time they hit lore e.g. https://lore.kernel.org/all/68a574c0-2775-4275-b590-b7f362ae3885@xxxxxxxxxxxxxxxxxxx/raw (not sure where that's happening). There are some suggestions for older versions of Thunderbird but none of the options exist for me. It seems I'm not the only one with an issue https://www.reddit.com/r/Thunderbird/comments/18drd4p/how_to_set_contenttransferencoding/ I'll keep looking but if anyone knows how to tame Thunderbird that'd be a great help.
