On Sun, 30 Jun 2024 20:36:24 +0200, Caleb Connolly wrote: > Describe the Samsung AMB655X panel. It has three supplies. > > Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx> > --- > .../bindings/display/panel/samsung,amb655x.yaml | 63 ++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dts:20.11-21: Warning (reg_format): /example-0/panel@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240630-oneplus8-v2-1-c4a1f8da74f1@xxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.