Add device tree documentation for AD4000 series of ADC devices. Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx> --- .../bindings/iio/adc/adi,ad4000.yaml | 197 ++++++++++++++++++ MAINTAINERS | 7 + 2 files changed, 204 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml new file mode 100644 index 000000000000..e413a9d8d2a2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4000 and similar Analog to Digital Converters + +maintainers: + - Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx> + +description: | + Analog Devices AD4000 family of Analog to Digital Converters with SPI support. + Specifications can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + oneOf: + - const: adi,ad4000 + - items: + - enum: + - adi,ad4004 + - adi,ad4008 + - const: adi,ad4000 + + - const: adi,ad4001 + - items: + - enum: + - adi,ad4005 + - const: adi,ad4001 + + - const: adi,ad4002 + - items: + - enum: + - adi,ad4006 + - adi,ad4010 + - const: adi,ad4002 + + - const: adi,ad4003 + - items: + - enum: + - adi,ad4007 + - adi,ad4011 + - const: adi,ad4003 + + - const: adi,ad4020 + - items: + - enum: + - adi,ad4021 + - adi,ad4022 + - const: adi,ad4020 + + - const: adi,adaq4001 + + - const: adi,adaq4003 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 102040816 # for VIO > 2.7 V, 81300813 for VIO > 1.7 V + + adi,sdi-pin: + $ref: /schemas/types.yaml#/definitions/string + enum: [ high, low, cs, sdi ] + default: sdi + description: + Describes how the ADC SDI pin is wired. A value of "sdi" indicates that + the ADC SDI is connected to host SDO. "high" indicates that the ADC SDI + pin is hard-wired to logic high (VIO). "low" indicates that it is + hard-wired low (GND). "cs" indicates that the ADC SDI pin is connected to + the host CS line. + + '#daisy-chained-devices': true + + vdd-supply: + description: A 1.8V supply that powers the chip (VDD). + + vio-supply: + description: + A 1.8V to 5.5V supply for the digital inputs and outputs (VIO). + + ref-supply: + description: + A 2.5 to 5V supply for the external reference voltage (REF). + + cnv-gpios: + description: + When provided, this property indicates the GPIO that is connected to the + CNV pin. + maxItems: 1 + + adi,high-z-input: + type: boolean + description: + High-Z mode allows the amplifier and RC filter in front of the ADC to be + chosen based on the signal bandwidth of interest, rather than the settling + requirements of the switched capacitor SAR ADC inputs. + + adi,gain-milli: + description: | + The hardware gain applied to the ADC input (in milli units). + The gain provided by the ADC input scaler is defined by the hardware + connections between chip pins OUT+, R1K-, R1K1-, R1K+, R1K1+, and OUT-. + If not present, default to 1000 (no actual gain applied). + $ref: /schemas/types.yaml#/definitions/uint16 + enum: [454, 909, 1000, 1900] + default: 1000 + + interrupts: + description: + The SDO pin can also function as a busy indicator. This node should be + connected to an interrupt that is triggered when the SDO line goes low + while the SDI line is high and the CNV line is low ("3-wire" mode) or the + SDI line is low and the CNV line is high ("4-wire" mode); or when the SDO + line goes high while the SDI and CNV lines are high (chain mode), + maxItems: 1 + +required: + - compatible + - reg + - vdd-supply + - vio-supply + - ref-supply + +allOf: + # The configuration register can only be accessed if SDI is connected to MOSI + - if: + required: + - adi,sdi-pin + then: + properties: + adi,high-z-input: false + # chain mode has lower SCLK max rate + - if: + required: + - '#daisy-chained-devices' + then: + properties: + spi-max-frequency: + maximum: 50000000 # for VIO > 2.7 V, 40000000 for VIO > 1.7 V + # Gain property only applies to ADAQ devices + - if: + properties: + compatible: + not: + contains: + enum: + - adi,adaq4001 + - adi,adaq4003 + then: + properties: + adi,gain-milli: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "adi,ad4020"; + reg = <0>; + spi-max-frequency = <71000000>; + vdd-supply = <&supply_1_8V>; + vio-supply = <&supply_1_8V>; + ref-supply = <&supply_5V>; + adi,sdi-pin = "cs"; + cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "adi,adaq4003"; + reg = <0>; + spi-max-frequency = <80000000>; + vdd-supply = <&supply_1_8V>; + vio-supply = <&supply_1_8V>; + ref-supply = <&supply_5V>; + adi,high-z-input; + adi,gain-milli = /bits/ 16 <454>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 9517093d889d..9aa6531f7cf2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1199,6 +1199,13 @@ W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml F: drivers/iio/dac/ad3552r.c +ANALOG DEVICES INC AD4000 DRIVER +M: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx> +L: linux-iio@xxxxxxxxxxxxxxx +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml + ANALOG DEVICES INC AD4130 DRIVER M: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> L: linux-iio@xxxxxxxxxxxxxxx -- 2.43.0
