On 28.06.2024 8:32 PM, Vikram Sharma wrote: > Add support for IMX577 camera sensor for SC7280 SoC. > > Signed-off-by: Hariram Purushothaman <quic_hariramp@xxxxxxxxxxx> > Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@xxxxxxxxxxx> > Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 9ac251fec262..1c99ee09a11a 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state { > bias-pull-down; > }; > > + cam2_default: cam2-default { > + rst { > + pins = "gpio78"; /*cam3*/ You can drop these comments.. the node name and label suggest this is cam*2* anyway > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + mclk { > + pins = "gpio67"; /*cam3*/ > + function = "cam_mclk"; > + drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/ /* why? */ Konrad