simple-audio-mux is designed to be used generally, thus "Input 1" or "Input 2" are used to selecting MUX input. This numbered inputs would work, but might be not user friendly in some case, for example in case of system hardware design has some clear labels. Adds new "state-labels" property and enable to select MUX by own state names. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> --- Documentation/devicetree/bindings/sound/simple-audio-mux.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml index 9f319caf3db74..8884f085a5c02 100644 --- a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml +++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml @@ -24,6 +24,10 @@ properties: description: | GPIOs used to select the input line. + state-labels: + description: | + State of input line. default is "Input 1", "Input 2" + sound-name-prefix: true required: -- 2.43.0