On 6/27/24 22:12, Nishanth Menon wrote:
On 21:56-20240627, Ayush Singh wrote:
DONOTMERGE
^^ might be better off in the diffstat and explain why DONOT MERGE :)
[...]
There are 2 reasons for DONOTMERGE
1. Mikrobus boards config should not live here. It is supposed to be
independent of the system and arch.
2. I am going to be cleaning up and sending this once at least the
dt-bindings are approved.
I have included it in the patch to provide some idea about how it will
supposedly look like (and anyone who might want to test this stuff). I
will try to remember to add it in diffstat in the future.
+ mikrobus_spi_pins_gpio: mikrobus-spi-gpio-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0194, PIN_INPUT, 7) /* (B19) MCASP0_AXR3.GPIO1_7 */
+ AM62X_IOPAD(0x0198, PIN_INPUT, 7) /* (A19) MCASP0_AXR2.GPIO1_8 */
+ AM62X_IOPAD(0x01ac, PIN_INPUT, 7) /* (E19) MCASP0_AFSR.GPIO1_13 */
+ AM62X_IOPAD(0x01b0, PIN_INPUT, 7) /* (A20) MCASP0_ACLKR.GPIO1_14 */
+ >;
+ };
we could potentially get rid of these if we get the gpio-ranges correct
on pinctrl? I have not gotten around to am62x yet - but see this:
https://lore.kernel.org/linux-arm-kernel/20240627162539.691223-1-nm@xxxxxx/T/#t
[...]
Thanks. Will look into this before sending an actual patch for
beagleplay dts as well.
Ayush Singh
