On 27/06/2024 14:38, Dmitry Baryshkov wrote:
On Thu, Jun 27, 2024 at 12:55:20PM GMT, Srinivas Kandagatla wrote:
Add support to parse static master port map information from device tree.
This is required for correct port mapping between soundwire device and
master ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
sound/soc/codecs/wsa884x.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/soc/codecs/wsa884x.c b/sound/soc/codecs/wsa884x.c
index a9767ef0e39d..72ff71bfb827 100644
--- a/sound/soc/codecs/wsa884x.c
+++ b/sound/soc/codecs/wsa884x.c
@@ -1887,6 +1887,14 @@ static int wsa884x_probe(struct sdw_slave *pdev,
wsa884x->sconfig.direction = SDW_DATA_DIR_RX;
wsa884x->sconfig.type = SDW_STREAM_PDM;
+ /**
+ * Port map index starts with 0, however the data port for this codec
+ * are from index 1
+ */
+ if (of_property_read_u32_array(dev->of_node, "qcom,port-mapping", &pdev->m_port_map[1],
+ WSA884X_MAX_SWR_PORTS))
+ dev_info(dev, "Static Port mapping not specified\n");
Same comment. Either dev_warn (if it's something to warn about) or
dev_info.
Or, as your commit message mentions that it is required, it should be an
error if the port mapping is not specified.
This is an optional property for older SoCs which have 1:1 port map
between device and master.
--srini
+
pdev->prop.sink_ports = GENMASK(WSA884X_MAX_SWR_PORTS, 0);
pdev->prop.simple_clk_stop_capable = true;
pdev->prop.sink_dpn_prop = wsa884x_sink_dpn_prop;
--
2.25.1