From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Split the current .dts into two: the existing one keeps the name and supports revision 2 of the board while patch 2 adds a .dts for revision 3. Changes since v2: - use correct phy-mode for Rev3 Changes since v1: - add a new compatible for Rev3 Bartosz Golaszewski (3): dt-bindings: arm: qcom: add sa8775p-ride Rev 3 arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi arm64: dts: qcom: sa8775p-ride-r3: add new board file .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts | 47 + arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 836 +----------------- arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 814 +++++++++++++++++ 5 files changed, 885 insertions(+), 814 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi -- 2.43.0