Hi, This series adds the mach-omap2 code for the wkup_m3_rproc driver submitted here [1]. pdata-quirks patch requires the pdata added with patch 3 of the aforementioned series. The dt patch was previously included as part of the rproc series here [2]. Changes are: v1->v2: -Because the firmware loading has changed, the wkup_m3 node has moved into the soc node and ranges have been added so the device address to virtual address translation can work. -Removed the ti,no-reset-on-init flag as asserting the hard-reset line on init is what the wkup_m3 has by default already. Regards, Dave [1] https://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg114621.html [2] http://www.spinics.net/lists/arm-kernel/msg387984.html Dave Gerlach (2): ARM: OMAP2+: Use pdata-quirks for wkup_m3 deassert_hardreset ARM: dts: am33xx: Move wkup_m3 node to soc node and add ranges arch/arm/boot/dts/am33xx.dtsi | 21 +++++++++++++-------- arch/arm/mach-omap2/pdata-quirks.c | 13 +++++++++++++ 2 files changed, 26 insertions(+), 8 deletions(-) -- 2.3.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
