This series adds initial support for the Xunlong Orange Pi 3B board. The Xunlong Orange Pi 3B is a single-board computer based on the Rockchip RK3566 SoC. Schematic for Orange Pi 3B can be downloaded from: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-3B.html Changes in v2: - Add DT for v2.1 hw revision, rename initial DT to v1.1: - Ethernet phy io voltage: 3v3 (v1.1) / 1v8 (v2.1) - Etherent reset gpios: GPIO3_C2 (v1.1) / GPIO4_C4 (v2.1) - WiFi/BT: CDW-20U5622 (v1.1) / AP6256 (v2.1) - Rename led node and move led pinctrl props - Use regulator-.* nodename for fixed regulators - Drop rockchip,mic-in-differential prop - Add cap-mmc-highspeed to sdhci node - Add no-mmc and no-sd to sdmmc1 node Jonas Karlman (2): dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Xunlong Orange Pi 3B .../devicetree/bindings/arm/rockchip.yaml | 8 + arch/arm64/boot/dts/rockchip/Makefile | 2 + .../dts/rockchip/rk3566-orangepi-3b-v1.1.dts | 29 + .../dts/rockchip/rk3566-orangepi-3b-v2.1.dts | 70 ++ .../boot/dts/rockchip/rk3566-orangepi-3b.dtsi | 678 ++++++++++++++++++ 5 files changed, 787 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v1.1.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v2.1.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi -- 2.45.2
