any suggestions? hoping it does no laying around so long as v2 regards Frank > Gesendet: Samstag, 08. Juni 2024 um 10:05 Uhr > Von: "Frank Wunderlich" <linux@xxxxxxxxx> > An: "Matthias Brugger" <matthias.bgg@xxxxxxxxx>, "AngeloGioacchino Del Regno" <angelogioacchino.delregno@xxxxxxxxxxxxx>, "Rob Herring" <robh@xxxxxxxxxx>, "Krzysztof Kozlowski" <krzk+dt@xxxxxxxxxx>, "Conor Dooley" <conor+dt@xxxxxxxxxx> > Cc: "Frank Wunderlich" <frank-w@xxxxxxxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-mediatek@xxxxxxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx, "Daniel Golle" <daniel@xxxxxxxxxxxxxx>, "Rob Herring" <robh+dt@xxxxxxxxxx> > Betreff: [PATCH v3 1/2] arm64: dts: mt7986: add dtbs with applied overlays for bpi-r3 > > From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> > > Build devicetree binaries for testing overlays and providing users > full dtb without using overlays. > > Suggested-by: Rob Herring <robh+dt@xxxxxxxxxx> > Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> > --- > https://lore.kernel.org/all/CAL_JsqK_3xxD0DFwipXO85P=q=EYjUdjE1_8g1MKtvw3vVzx5A@xxxxxxxxxxxxxx/ > https://lore.kernel.org/all/CAL_JsqJSi=kJSix=f3787ULZnaCy_Y26Phdhy5y9fat_vkDuUw@xxxxxxxxxxxxxx/ > > v2: > make full dtbs multiline for better readability > --- > arch/arm64/boot/dts/mediatek/Makefile | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 37b4ca3a87c9..0ec5b904d35d 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -15,6 +15,27 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo > +mt7986a-bananapi-bpi-r3-emmc-nand-dtbs := \ > + mt7986a-bananapi-bpi-r3.dtb \ > + mt7986a-bananapi-bpi-r3-emmc.dtbo \ > + mt7986a-bananapi-bpi-r3-nand.dtbo > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nand.dtb > +mt7986a-bananapi-bpi-r3-emmc-nor-dtbs := \ > + mt7986a-bananapi-bpi-r3.dtb \ > + mt7986a-bananapi-bpi-r3-emmc.dtbo \ > + mt7986a-bananapi-bpi-r3-nor.dtbo > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nor.dtb > +mt7986a-bananapi-bpi-r3-sd-nand-dtbs := \ > + mt7986a-bananapi-bpi-r3.dtb \ > + mt7986a-bananapi-bpi-r3-sd.dtbo \ > + mt7986a-bananapi-bpi-r3-nand.dtbo > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nand.dtb > +mt7986a-bananapi-bpi-r3-sd-nor-dtbs := \ > + mt7986a-bananapi-bpi-r3.dtb \ > + mt7986a-bananapi-bpi-r3-sd.dtbo \ > + mt7986a-bananapi-bpi-r3-nor.dtbo > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nor.dtb > + > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb > -- > 2.34.1 > >
