Change pcie interrupt order to fix below warning.
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: pcie@3400000: interrupt-names:0: 'pme' was expected
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: pcie@3400000: interrupt-names:1: 'aer' was expected
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 18 +++++++++---------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 64e14154d5969..daded853457bc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -535,9 +535,9 @@ pcie1: pcie@3400000 {
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
- interrupt-names = "aer", "pme";
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 801c5b77d608f..8ce73a076e77a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -801,9 +801,9 @@ pcie1: pcie@3400000 {
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
- interrupt-names = "aer", "pme";
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -840,9 +840,9 @@ pcie2: pcie@3500000 {
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
- interrupt-names = "aer", "pme";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -879,9 +879,9 @@ pcie3: pcie@3600000 {
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
- interrupt-names = "aer", "pme";
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
--
2.34.1
