This series adds initial support for the Radxa ROCK 3B board. The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community version based on the RK3568 SoC and an industrial version based on the RK3568J SoC. Schematic for ROCK 3B can be found at: https://dl.radxa.com/rock3/docs/hw/3b/Radxa_ROCK_3B_V1.51_SCH.pdf Changes in v2: - Drop rk809 dt-bindings patches, replaced by series at [1] - Use regulator-.* nodename for fixed regulators - Drop rockchip,mic-in-differential prop - Shorten Ethernet phy reset-deassert-us to 50 ms - Fix pcie pinctrl - Add keep-power-in-suspend to sdmmc2 - Collect a-b tag [1] https://lore.kernel.org/all/20240622-rk809-fixes-v2-0-c0db420d3639@xxxxxxxxxxxxx/ Jonas Karlman (2): dt-bindings: arm: rockchip: Add Radxa ROCK 3B arm64: dts: rockchip: Add Radxa ROCK 3B .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3568-rock-3b.dts | 780 ++++++++++++++++++ 3 files changed, 786 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts -- 2.45.2