PHYTECs phyBOARD-Lyra carrier board is able to accomidate multiple SoMs. Refactor k3-am625-phyboard-lyra-rdk.dts into an include file so it can be reused in combination with our phyCORE-AM62Ax SoM. Signed-off-by: Garrett Giordano <ggiordano@xxxxxxxxxx> --- -v2 - Reformat patches using -B/-M/-C arguments --- .../dts/ti/k3-am625-phyboard-lyra-rdk.dts | 501 +----------------- ...ra-rdk.dts => k3-am62x-phyboard-lyra.dtsi} | 8 - 2 files changed, 18 insertions(+), 491 deletions(-) rewrite arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts (96%) copy arch/arm64/boot/dts/ti/{k3-am625-phyboard-lyra-rdk.dts => k3-am62x-phyboard-lyra.dtsi} (97%) diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts dissimilarity index 96% index 50d2573c840e..4fa5efdffcd7 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts @@ -1,483 +1,18 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH - * Author: Wadim Egorov <w.egorov@xxxxxxxxx> - * - * Product homepage: - * https://www.phytec.com/product/phyboard-am62x - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/net/ti-dp83867.h> -#include "k3-am625.dtsi" -#include "k3-am62-phycore-som.dtsi" - -/ { - compatible = "phytec,am625-phyboard-lyra-rdk", - "phytec,am62-phycore-som", "ti,am625"; - model = "PHYTEC phyBOARD-Lyra AM625"; - - aliases { - serial2 = &main_uart0; - serial3 = &main_uart1; - mmc1 = &sdhci1; - usb0 = &usb0; - usb1 = &usb1; - ethernet1 = &cpsw_port2; - }; - - can_tc1: can-phy0 { - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <8000000>; - standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; - }; - - hdmi0: connector-hdmi { - compatible = "hdmi-connector"; - label = "hdmi"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&sii9022_out>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins_default>; - - key-home { - label = "home"; - linux,code = <KEY_HOME>; - gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - key-menu { - label = "menu"; - linux,code = <KEY_MENU>; - gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "phyBOARD-Lyra"; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphone Jack", - "Speaker", "External Speaker"; - simple-audio-card,routing = - "MIC3R", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "External Speaker", "SPOP", - "External Speaker", "SPOM"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound_master>; - simple-audio-card,frame-master = <&sound_master>; - simple-audio-card,bitclock-inversion; - - simple-audio-card,cpu { - sound-dai = <&mcasp2>; - }; - - sound_master: simple-audio-card,codec { - sound-dai = <&audio_codec>; - clocks = <&audio_refclk1>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>; - - led-1 { - gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - - led-2 { - gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - }; - }; - - vcc_1v8: regulator-vcc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_3v3_mmc: regulator-vcc-3v3-mmc { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3_MMC"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_3v3_sw: regulator-vcc-3v3-sw { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3_SW"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&main_pmx0 { - audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ - >; - }; - - gpio_keys_pins_default: gpio-keys-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ - >; - }; - - gpio_exp_int_pins_default: gpio-exp-int-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ - >; - }; - - hdmi_int_pins_default: hdmi-int-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ - >; - }; - - main_dss0_pins_default: main-dss0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ - AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ - AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ - AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ - AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ - AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ - AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ - AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ - AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ - AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ - AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ - AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ - AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ - AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ - AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ - AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ - AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ - AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ - AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ - AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ - >; - }; - - main_i2c1_pins_default: main-i2c1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ - AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ - >; - }; - - main_mcan0_pins_default: main-mcan0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */ - AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ - >; - }; - - main_mcasp2_pins_default: main-mcasp2-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */ - AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */ - AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */ - AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */ - >; - }; - - main_mmc1_pins_default: main-mmc1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */ - AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */ - AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */ - AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */ - AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */ - AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */ - AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ - >; - }; - - main_rgmii2_pins_default: main-rgmii2-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ - AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ - AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ - AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ - AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ - AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ - AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ - AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ - AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ - AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ - AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ - AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ - >; - }; - - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ - >; - }; - - main_uart1_pins_default: main-uart1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ - AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */ - AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */ - AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */ - >; - }; - - main_usb1_pins_default: main-usb1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ - >; - }; - - user_leds_pins_default: user-leds-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ - >; - }; -}; - -&cpsw3g { - pinctrl-names = "default"; - pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; -}; - -&cpsw_port2 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy3>; -}; - -&cpsw3g_mdio { - cpsw3g_phy3: ethernet-phy@3 { - compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; - reg = <3>; - ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; -}; - -&dss { - pinctrl-names = "default"; - pinctrl-0 = <&main_dss0_pins_default>; - status = "okay"; -}; - -&dss_ports { - #address-cells = <1>; - #size-cells = <0>; - - /* VP2: DPI/HDMI Output */ - port@1 { - reg = <1>; - - dpi1_out: endpoint { - remote-endpoint = <&sii9022_in>; - }; - }; -}; - -&main_i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <100000>; - status = "okay"; - - audio_codec: audio-codec@18 { - pinctrl-names = "default"; - pinctrl-0 = <&audio_ext_refclk1_pins_default>; - - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3007"; - reg = <0x18>; - ai3x-micbias-vg = <2>; - - AVDD-supply = <&vcc_3v3_sw>; - IOVDD-supply = <&vcc_3v3_sw>; - DRVDD-supply = <&vcc_3v3_sw>; - DVDD-supply = <&vcc_1v8>; - }; - - gpio_exp: gpio-expander@21 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio_exp_int_pins_default>; - compatible = "nxp,pcf8574"; - reg = <0x21>; - interrupt-parent = <&main_gpio1>; - interrupts = <49 0>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - gpio-line-names = "", "GPIO1_CAN0_nEN", - "GPIO2_LED2", "GPIO3_LVDS_GPIO", - "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN", - "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET"; - }; - - usb-pd@22 { - compatible = "ti,tps6598x"; - reg = <0x22>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - self-powered; - data-role = "dual"; - power-role = "sink"; - port { - usb_con_hs: endpoint { - remote-endpoint = <&typec_hs>; - }; - }; - }; - }; - - sii9022: bridge-hdmi@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - - interrupt-parent = <&main_gpio0>; - interrupts = <16 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_int_pins_default>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sii9022_in: endpoint { - remote-endpoint = <&dpi1_out>; - }; - }; - - port@1 { - reg = <1>; - - sii9022_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - eeprom@51 { - compatible = "atmel,24c02"; - pagesize = <16>; - reg = <0x51>; - }; -}; - -&main_mcan0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_mcan0_pins_default>; - phys = <&can_tc1>; - status = "okay"; -}; - -&main_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; - status = "okay"; -}; - -&main_uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart1_pins_default>; - /* Main UART1 may be used by TIFS firmware */ - status = "okay"; -}; - -&mcasp2 { - #sound-dai-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&main_mcasp2_pins_default>; - - /* MCASP_IIS_MODE */ - op-mode = <0>; - tdm-slots = <2>; - - /* 0: INACTIVE, 1: TX, 2: RX */ - serial-dir = < - 0 0 1 2 - 0 0 0 0 - 0 0 0 0 - 0 0 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; - status = "okay"; -}; - -&sdhci1 { - vmmc-supply = <&vcc_3v3_mmc>; - vqmmc-supply = <&vddshv5_sdio>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - disable-wp; - no-1-8-v; - status = "okay"; -}; - -&usbss0 { - ti,vbus-divider; - status = "okay"; -}; - -&usbss1 { - ti,vbus-divider; - status = "okay"; -}; - -&usb0 { - usb-role-switch; - - port { - typec_hs: endpoint { - remote-endpoint = <&usb_con_hs>; - }; - }; -}; - -&usb1 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&main_usb1_pins_default>; -}; +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@xxxxxxxxx> + * + * Product homepage: + * https://www.phytec.com/product/phyboard-am62x + */ + +#include "k3-am625.dtsi" +#include "k3-am62-phycore-som.dtsi" +#include "k3-am62x-phyboard-lyra.dtsi" + +/ { + compatible = "phytec,am625-phyboard-lyra-rdk", + "phytec,am62-phycore-som", "ti,am625"; + model = "PHYTEC phyBOARD-Lyra AM625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi similarity index 97% copy from arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts copy to arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi index 50d2573c840e..e4633af87eb9 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi @@ -3,22 +3,14 @@ * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@xxxxxxxxx> * - * Product homepage: - * https://www.phytec.com/product/phyboard-am62x */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/net/ti-dp83867.h> -#include "k3-am625.dtsi" -#include "k3-am62-phycore-som.dtsi" / { - compatible = "phytec,am625-phyboard-lyra-rdk", - "phytec,am62-phycore-som", "ti,am625"; - model = "PHYTEC phyBOARD-Lyra AM625"; - aliases { serial2 = &main_uart0; serial3 = &main_uart1; -- 2.25.1