On Tue, Jun 25, 2024 at 06:38:13PM GMT, Marc Gonzalez wrote:
> The TI TDP158 is an AC-Coupled HDMI signal to TMDS Redriver supporting
> DVI 1.0 and HDMI 1.4b and 2.0b output signals.
>
> The default settings work fine for our use-case.
>
> Signed-off-by: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/Kconfig | 6 +++
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/ti-tdp158.c | 103 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 110 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index c621be1a99a89..0859f85cb4b69 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -368,6 +368,12 @@ config DRM_TI_DLPC3433
> It supports up to 720p resolution with 60 and 120 Hz refresh
> rates.
>
> +config DRM_TI_TDP158
> + tristate "TI TDP158 HDMI/TMDS bridge"
> + depends on OF
> + help
> + Texas Instruments TDP158 HDMI/TMDS Bridge driver
Please run ./scripts/checkpatch.pl on your patch.
> +
> config DRM_TI_TFP410
> tristate "TI TFP410 DVI/HDMI bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 7df87b582dca3..3daf803ce80b6 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -32,6 +32,7 @@ obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
> obj-$(CONFIG_DRM_TI_DLPC3433) += ti-dlpc3433.o
> obj-$(CONFIG_DRM_TI_SN65DSI83) += ti-sn65dsi83.o
> obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
> +obj-$(CONFIG_DRM_TI_TDP158) += ti-tdp158.o
> obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
> obj-$(CONFIG_DRM_TI_TPD12S015) += ti-tpd12s015.o
> obj-$(CONFIG_DRM_NWL_MIPI_DSI) += nwl-dsi.o
> diff --git a/drivers/gpu/drm/bridge/ti-tdp158.c b/drivers/gpu/drm/bridge/ti-tdp158.c
> new file mode 100644
> index 0000000000000..b65132e3598fc
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/ti-tdp158.c
> @@ -0,0 +1,103 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2024 Freebox SAS
> + */
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <linux/i2c.h>
> +
> +struct tdp158 {
> + struct drm_bridge bridge;
> + struct drm_bridge *next;
> + struct gpio_desc *enable; // Operation Enable - pin 36
> + struct regulator *vcc; // 3.3V
> + struct regulator *vdd; // 1.1V
> +};
> +
> +static void tdp158_enable(struct drm_bridge *bridge, struct drm_bridge_state *prev)
> +{
> + int err;
> + struct tdp158 *tdp158 = bridge->driver_private;
> +
> + if ((err = regulator_enable(tdp158->vcc)))
> + pr_err("%s: vcc: %d", __func__, err);
- dev_err
- please expand error messages
- ERROR: do not use assignment in if condition
> +
> + if ((err = regulator_enable(tdp158->vdd)))
> + pr_err("%s: vdd: %d", __func__, err);
> +
> + gpiod_set_value_cansleep(tdp158->enable, 1);
> +}
> +
> +static void tdp158_disable(struct drm_bridge *bridge, struct drm_bridge_state *prev)
> +{
> + struct tdp158 *tdp158 = bridge->driver_private;
> +
> + gpiod_set_value_cansleep(tdp158->enable, 0);
> + regulator_disable(tdp158->vdd);
> + regulator_disable(tdp158->vcc);
> +}
> +
> +static int tdp158_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
> +{
> + struct tdp158 *tdp158 = bridge->driver_private;
empty line
> + return drm_bridge_attach(bridge->encoder, tdp158->next, bridge, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
No. Pass flags directly.
> +}
> +
> +static const struct drm_bridge_funcs tdp158_bridge_funcs = {
> + .attach = tdp158_attach,
> + .atomic_enable = tdp158_enable,
> + .atomic_disable = tdp158_disable,
> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> + .atomic_reset = drm_atomic_helper_bridge_reset,
> +};
> +
> +static int tdp158_bridge_probe(struct i2c_client *client)
> +{
> + struct tdp158 *tdp158;
> + struct device *dev = &client->dev;
> +
> + tdp158 = devm_kzalloc(dev, sizeof(*tdp158), GFP_KERNEL);
> + if (!tdp158)
> + return -ENOMEM;
> +
> + tdp158->next = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
Missing `select DRM_PANEL_BRIDGE`
> + if (IS_ERR(tdp158->next))
> + return dev_err_probe(dev, PTR_ERR(tdp158->next), "next");
This results in a cryptic message 'foo: ESOMETHING: next'. Please
expand.
> +
> + tdp158->vcc = devm_regulator_get(dev, "vcc");
> + if (IS_ERR(tdp158->vcc))
> + return dev_err_probe(dev, PTR_ERR(tdp158->vcc), "vcc");
> +
> + tdp158->vdd = devm_regulator_get(dev, "vdd");
> + if (IS_ERR(tdp158->vdd))
> + return dev_err_probe(dev, PTR_ERR(tdp158->vdd), "vdd");
> +
> + tdp158->enable = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(tdp158->enable))
> + return dev_err_probe(dev, PTR_ERR(tdp158->enable), "enable");
> +
> + tdp158->bridge.of_node = dev->of_node;
> + tdp158->bridge.funcs = &tdp158_bridge_funcs;
> + tdp158->bridge.driver_private = tdp158;
> +
> + return devm_drm_bridge_add(dev, &tdp158->bridge);
> +}
> +
> +static const struct of_device_id tdp158_bridge_match_table[] = {
> + { .compatible = "ti,tdp158" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, tdp158_bridge_match_table);
> +
> +static struct i2c_driver tdp158_bridge_driver = {
> + .probe = tdp158_bridge_probe,
> + .driver = {
> + .name = "tdp158-bridge",
> + .of_match_table = tdp158_bridge_match_table,
> + },
> +};
> +module_i2c_driver(tdp158_bridge_driver);
> +
> +MODULE_DESCRIPTION("TI TDP158 driver");
> +MODULE_LICENSE("GPL");
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
