Fix pin copy-paste error in STM32MP13xx eth2-rgmii-sleep-0 pinmux
node. Clearly the pins like PG11 are not supposed to be duplicated
in the node pinmux property, fix them up to match the hardware pin
assignment.
Fixes: d1193e65647e ("ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board")
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Cc: Christophe Roullier <christophe.roullier@xxxxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: kernel@xxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
---
arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
index 42995a8f5034c..9c7cf8f3c3e8b 100644
--- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
@@ -157,16 +157,16 @@ eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */
<STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */
- <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD2 */
- <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
- <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RGMII_TX_CTL */
- <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */
<STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
<STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
<STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
- <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD2 */
- <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */
<STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */
<STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */
};
--
2.43.0
