The phyCORE-AM62Ax [1] is a SoM (System on Module) featuring TI's AM62Ax SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM62Ax family. A development Kit, called phyBOARD-Lyra [2] is used as a carrier board reference design with a mapper board being used to allow the phyCORE-AM62Ax to fit the phyBOARD-Lyra. Supported features: * Debug UART * SPI NOR Flash * eMMC * 2x Ethernet * Micro SD card * I2C EEPROM * I2C RTC * GPIO Expander * LEDs * USB * HDMI * USB-C * Audio For more details, see: [1] Product page SoM: https://www.phytec.com/product/phycore-am62a [2] Product page CB: https://www.phytec.com/product/phyboard-am62a Signed-off-by: Garrett Giordano <ggiordano@xxxxxxxxxx> --- arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am62a-phycore-som.dtsi | 330 ++++++++++++++++++ .../dts/ti/k3-am62a7-phyboard-lyra-rdk.dts | 18 + 3 files changed, 350 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 2c327cc320cf..cd6e14edbbea 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb # Boards with AM62Ax SoC dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb @@ -173,6 +174,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ # Enable support for device-tree overlays DTC_FLAGS_k3-am625-beagleplay += -@ DTC_FLAGS_k3-am625-phyboard-lyra-rdk += -@ +DTC_FLAGS_k3-am62a7-phyboard-lyra-rdk += -@ DTC_FLAGS_k3-am625-sk += -@ DTC_FLAGS_k3-am62-lp-sk += -@ DTC_FLAGS_k3-am62a7-sk += -@ diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi new file mode 100644 index 000000000000..a5aceaa39670 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023 - 2024 PHYTEC America LLC + * Author: Garrett Giordano <ggiordano@xxxxxxxxxx> + * + * Product homepage: + * https://www.phytec.com/product/phycore-am62a + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-AM62Ax"; + compatible = "phytec,am62a-phycore-som", "ti,am62a7"; + + aliases { + ethernet0 = &cpsw_port1; + gpio0 = &main_gpio0; + gpio1 = &main_gpio1; + i2c0 = &main_i2c0; + mmc0 = &sdhci0; + rtc0 = &i2c_som_rtc; + spi0 = &ospi0; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x24000000>; + alloc-ranges = <0x00 0xc0000000 0x00 0x24000000>; + linux,cma-default; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0x01e00000>; + no-map; + }; + }; + + vcc_5v0_som: regulator-vcc-5v0-som { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0_SOM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + leds_pins_default: leds-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x034, PIN_OUTPUT, 7) /* (K20) OSPI0_CSN2.GPIO0_13 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */ + AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */ + >; + }; + + main_mdio1_pins_default: main-mdio1-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ + AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ + >; + }; + + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */ + AM62AX_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB7) MMC0_CLK */ + AM62AX_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */ + AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */ + AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */ + AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */ + AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */ + AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */ + AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */ + AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ + AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ + AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */ + AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */ + AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */ + AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */ + AM62AX_IOPAD(0x134, PIN_OUTPUT, 0) /* (Y17) RGMII1_TD0 */ + AM62AX_IOPAD(0x138, PIN_OUTPUT, 0) /* (V16) RGMII1_TD1 */ + AM62AX_IOPAD(0x13c, PIN_OUTPUT, 0) /* (Y16) RGMII1_TD2 */ + AM62AX_IOPAD(0x140, PIN_OUTPUT, 0) /* (AA17) RGMII1_TD3 */ + AM62AX_IOPAD(0x130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */ + AM62AX_IOPAD(0x12c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */ + >; + }; + + ospi0_pins_default: ospi0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */ + AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */ + AM62AX_IOPAD(0x038, PIN_OUTPUT, 0) /* (G20) OSPI0_CSn3 */ + AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */ + AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */ + AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */ + AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (H18) OSPI0_D3 */ + AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (K21) OSPI0_D4 */ + AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (H19) OSPI0_D5 */ + AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (J20) OSPI0_D6 */ + AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */ + >; + }; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + + cpsw3g_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&fss { + status = "okay"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_5v0_som>; + buck2-supply = <&vcc_5v0_som>; + buck3-supply = <&vcc_5v0_som>; + ldo1-supply = <&vdd_3v3>; + ldo2-supply = <&vdd_1v8>; + ldo3-supply = <&vcc_5v0_som>; + ldo4-supply = <&vcc_5v0_som>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + ti,power-button; + system-power-controller; + + regulators { + vdd_3v3: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_lpddr4: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + vddshv5_sdio: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + vddr_core: ldo2 { + regulator-name = "VDDR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + vdda_1v8: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_2v5: ldo4 { + regulator-name = "VDD_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x50>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&main_gpio0 { + status = "okay"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_gpio_intr { + status = "okay"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + status = "okay"; + + serial_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + disable-wp; + non-removable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts new file mode 100644 index 000000000000..3b93409b23e7 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023 - 2024 PHYTEC America LLC + * Author: Garrett Giordano <ggiordano@xxxxxxxxxx> + * + * Product homepage: + * https://www.phytec.com/product/phyboard-am62a + */ + +#include "k3-am62a7.dtsi" +#include "k3-am62a-phycore-som.dtsi" +#include "k3-am62x-phyboard-lyra.dtsi" + +/ { + compatible = "phytec,am62a7-phyboard-lyra-rdk", + "phytec,am62a-phycore-som", "ti,am62a7"; + model = "PHYTEC phyBOARD-Lyra AM62A7"; +}; -- 2.25.1
