On Tue, Jun 25, 2024 at 5:14 PM Bartosz Golaszewski <brgl@xxxxxxxx> wrote: > > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> > > Split the current .dts into two: the existing one keeps the name and > supports revision 2 of the board while patch 2 adds a .dts for revision 3. > > Changes since v1: > - add a new compatible for Rev3 > > Bartosz Golaszewski (3): > dt-bindings: arm: qcom: add sa8775p-ride Rev 3 > arm64: dts: qcom: move common parts for sa8775p-ride variants into a > .dtsi > arm64: dts: qcom: sa8775p-ride-r3: add new board file > > .../devicetree/bindings/arm/qcom.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts | 47 + > arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 836 +----------------- > arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 814 +++++++++++++++++ > 5 files changed, 885 insertions(+), 814 deletions(-) > create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts > create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi > > -- > 2.43.0 > Eeek -ETOOEARLY, please disregard this one, it requires one more change. Sorry for the noise. Bartosz
