The audio support on J722S-EVM is using TLV320AIC3106[0] codec connected to McASP1 serializers. - Add the nodes for sound-card, audio codec and McASP1. - Add hog for TRC_MUX_SEL to select between McASP and TRACE signals - Add hogs for GPIO_AUD_RSTn and MCASP1_FET_SEL which is used to switch between HDMI audio and codec audio. - Add pinmux for MCASP1 and AUDIO_EXT_REFCLK1. [0]: <https://www.ti.com/lit/gpn/TLV320AIC3106> Signed-off-by: Jayesh Choudhary <j-choudhary@xxxxxx> Reviewed-by: Jai Luthra <j-luthra@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 109 ++++++++++++++++++++++++ 1 file changed, 109 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index 253b02f0437d..facf61957af5 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -107,6 +107,15 @@ vdd_sd_dv: regulator-TLV71033 { <3300000 0x1>; }; + vsys_io_3v3: regulator-vsys-io-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + vsys_io_1v8: regulator-vsys-io-1v8 { compatible = "regulator-fixed"; regulator-name = "vsys_io_1v8"; @@ -124,6 +133,35 @@ vsys_io_1v2: regulator-vsys-io-1v2 { regulator-always-on; regulator-boot-on; }; + + codec_audio: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "J722S-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&audio_refclk1>; + }; + }; }; &main_pmx0 { @@ -210,6 +248,21 @@ main_usb1_pins_default: main-usb1-default-pins { J722S_IOPAD(0x0258, PIN_INPUT, 0) /* (B27) USB1_DRVVBUS */ >; }; + + main_mcasp1_pins_default: main-mcasp1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0090, PIN_INPUT, 2) /* (P27) GPMC0_BE0n_CLE.MCASP1_ACLKX */ + J722S_IOPAD(0x0098, PIN_INPUT, 2) /* (V21) GPMC0_WAIT0.MCASP1_AFSX */ + J722S_IOPAD(0x008c, PIN_OUTPUT, 2) /* (N23) GPMC0_WEn.MCASP1_AXR0 */ + J722S_IOPAD(0x0084, PIN_INPUT, 2) /* (N21) GPMC0_ADVn_ALE.MCASP1_AXR2 */ + >; + }; + + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; }; &cpsw3g { @@ -285,6 +338,12 @@ &wkup_i2c0 { bootph-all; }; +&k3_clks { + /* Configure AUDIO_EXT_REFCLK1 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; +}; + &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; @@ -316,6 +375,41 @@ p05-hog { gpios = <5 GPIO_ACTIVE_HIGH>; output-high; }; + + p01_hog: p01-hog { + /* P01 - TRC_MUX_SEL */ + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "TRC_MUX_SEL"; + }; + + p02_hog: p02-hog { + /* P02 - MCASP1_FET_SEL */ + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "MCASP1_FET_SEL"; + }; + + p13_hog: p13-hog { + /* P13 - GPIO_AUD_RSTn */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "GPIO_AUD_RSTn"; + }; + }; + + tlv320aic3106: audio-codec@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + ai3x-micbias-vg = <1>; /* 2.0V */ + AVDD-supply = <&vsys_io_3v3>; + IOVDD-supply = <&vsys_io_3v3>; + DRVDD-supply = <&vsys_io_3v3>; + DVDD-supply = <&vsys_io_1v8>; }; }; @@ -457,3 +551,18 @@ &usb1 { phys = <&serdes0_usb_link>; phy-names = "cdns3,usb3-phy"; }; + +&mcasp1 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp1_pins_default>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; +}; -- 2.25.1
