On Tue, Jun 25, 2024 at 09:44:42AM +0200, Krzysztof Kozlowski wrote:
> On 25/06/2024 19:51, Pengfei Li wrote:
> > IMX93_CLK_END was previously defined in imx93-clock.h to
> > indicate the number of clocks, but it is not part of the
> > ABI, so it should be dropped.
> >
> > Now, the driver gets the number of clks by querying the
> > maximum index in the clk array. Due to the discontinuity
> > in the definition of clk index, with some gaps present,
> > the total count cannot be obtained by summing the array
> > size.
> >
> > Signed-off-by: Pengfei Li <pengfei.li_1@xxxxxxx>
> > ---
> > drivers/clk/imx/clk-imx93.c | 25 +++++++++++++++++++++----
> > 1 file changed, 21 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
> > index c6a9bc8ecc1f..68c929512e16 100644
> > --- a/drivers/clk/imx/clk-imx93.c
> > +++ b/drivers/clk/imx/clk-imx93.c
> > @@ -257,6 +257,20 @@ static const struct imx93_clk_ccgr {
> > static struct clk_hw_onecell_data *clk_hw_data;
> > static struct clk_hw **clks;
> >
> > +static int imx_clks_get_num(void)
> > +{
> > + u32 val = 0;
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(root_array); i++)
> > + val = max_t(u32, val, root_array[i].clk);
> > +
> > + for (i = 0; i < ARRAY_SIZE(ccgr_array); i++)
> > + val = max_t(u32, val, ccgr_array[i].clk);
> > +
> > + return val + 1;
> > +}
> > +
> > static int imx93_clocks_probe(struct platform_device *pdev)
> > {
> > struct device *dev = &pdev->dev;
> > @@ -264,14 +278,17 @@ static int imx93_clocks_probe(struct platform_device *pdev)
> > const struct imx93_clk_root *root;
> > const struct imx93_clk_ccgr *ccgr;
> > void __iomem *base, *anatop_base;
> > + int clks_num;
> > int i, ret;
> >
> > + clks_num = imx_clks_get_num();
> > +
> > clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws,
> > - IMX93_CLK_END), GFP_KERNEL);
> > + clks_num), GFP_KERNEL);
> > if (!clk_hw_data)
> > return -ENOMEM;
> >
> > - clk_hw_data->num = IMX93_CLK_END;
> > + clk_hw_data->num = clks_num;
>
> Why so complicated code instead of pre-processor define or array size?
>
> Best regards,
> Krzysztof
>
>
Hi Krzysztof,
Thanks for the comment, here are some of our thoughts.
Regarding the predefined method, it's easy to forget to update the macro definition when adding some new clocks to
imx93-clock.h in the future.
Also, we cannot use the array size method in this scenario, as some unnecessary clocks have been removed in the past,
resulting in discontinuous definitions of clock indexes. This means that the maximum clock index can be larger than
the allocated clk_hw array size. At this point, using the maximum index to access the clk_hw array will result in an
out of bounds error.
BR,
Pengfei Li
