On Mon, Jun 24, 2024 at 03:49:37PM +0300, Alisa-Dariana Roman wrote: > There are actually 4 configuration modes of clock source for AD719X > devices. Either a crystal can be attached externally between MCLK1 and > MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2 > pin. The other 2 modes make use of the 4.92MHz internal clock. > > To configure external clock as either a crystal or a CMOS-compatible > clock, changing the register settings is necessary. Therefore, add clock > name xtal alongside mclk. By selecting one or the other, the register is > configured. > > The presence of an external clock source is optional, not required. When > both clocks and clock-names properties are present, an external clock > source is used. If the intention is to use the internal clock, both > properties should be absent. Modify required properties accordingly. > > Signed-off-by: Alisa-Dariana Roman <alisa.roman@xxxxxxxxxx> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Attachment:
signature.asc
Description: PGP signature
