[PATCH RFT v3 0/5] Add sc7180 camss subsys support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SM7125 is the SoC found in the Xiaomi Redmi Note 9 Pro(joyeuse) cellphone.
This series adds support to bring up the CSIPHY, CSID, VFE/RDI interfaces.

Since SM7125 is a low-speed variant of SC7180, SC7180 testers please
take a look and have a test as well.

sc7180 provides

- 2 x VFE
- 1 x VFE Lite
- 2 x CSID
- 1 x CSID Lite
- 4 x CSI PHY

The sc7180-camss binding should be comaptible with sdm845 yaml.
I've copied a new yaml from sdm845-camss.yaml, strip all _src clk and
put new maintainer information. If this is not desirable then i can add binding to
existing sdm845 yaml instead.

In addition, a bootable tree of sm7125/joyeuse is availble at:
https://github.com/99degree/linux/tree/camss  

Signed-off-by: George Chan <gchan9527@xxxxxxxxx>
---
Changes in v3:
- Rebased on 20240522154659.510-1-quic_grosikop@xxxxxxxxxxx - Bryan
- Align email title to sc8280xp series - krzk
- Line-up dt-binding example ordering to same as qcom,sm8250-camss.yaml - krzk 
- Drop non-related patches #5 #6 #7, I will send follow-up patches later
- Add RFT tag to all patches, since no tested-by at all.
- Drop required-opps node from dt
- Link to v2: https://lore.kernel.org/r/20240624-b4-sc7180-camss-v2-0-0dfecdc50073@xxxxxxxxx

Changes in v2:
- Revised dt-binding title - krzk
- Revised dt-binding maintainers - krzk
- Drop all dt-binding minItems - krzk
- Drops "|" symbol postfixed to description - krzk 
- Accending order of dt-binding required list - krzk
- Added dt-binding item power-domain-name - Bryan
- Reformat dt-binding example - krzk
- Move reg as 2nd property - krzk
- Move reg-names as 3nd property - krzk
- Reduce iommus maxItems to 3 - rob's bot
- Reduce clocks maxItems to 24 - rob's bot
- Combine patch #2 and #3 - krzk and Bryan
- Split eror-print log for clk name from #5 - Konrad
- Reformat dt-node - krzk
- Corrected phy init sequence for v1.2.2 - Bryan
- Added 3 more debug info for missing clk and low clk-rate issue.
- Adding port info to ports sub-node
- Adding required-opps node to dt
- Link to v1: https://lore.kernel.org/r/20240621-b4-sc7180-camss-v1-0-14937929f30e@xxxxxxxxx

---
George Chan (5):
      dt-bindings: media: camss: Add qcom,sc7180-camss
      media: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
      media: qcom: camss: Add sc7180 support
      media: qcom: camss: Add sc7180 resources
      arm64: dts: qcom: sc7180: camss: Add CAMSS block definition

 .../bindings/media/qcom,sc7180-camss.yaml          | 328 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               | 133 +++++++++
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 135 +++++++++
 drivers/media/platform/qcom/camss/camss-vfe.c      |   2 +
 drivers/media/platform/qcom/camss/camss.c          | 251 ++++++++++++++++
 drivers/media/platform/qcom/camss/camss.h          |   1 +
 6 files changed, 850 insertions(+)
---
base-commit: 28f69d2ea67db489d4a94e7d04c21b14e5aa6535
change-id: 20240621-b4-sc7180-camss-cddc6b60a9b4

Best regards,
-- 
George Chan <gchan9527@xxxxxxxxx>






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux