On 24/06/2024 00:22, George Chan via B4 Relay wrote:
From: George Chan <gchan9527@xxxxxxxxx>
Print out missing clock's name when doing msm_vfe_subdev_init().
Also print out min clock rate required at vfe_set_clock_rates().
Signed-off-by: George Chan <gchan9527@xxxxxxxxx>
---
drivers/media/platform/qcom/camss/camss-vfe.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 05fa1adc1661..fbbf38755c0e 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -579,7 +579,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)
if (j == clock->nfreqs) {
dev_err(dev,
- "Pixel clock is too high for VFE");
+ "Pixel clock(%s) is too high for VFE, at least set to %lld",
+ clock->name, min_rate);
Pixel clock %lld Hz is too high for clock %s
return -EINVAL;
}
@@ -1452,8 +1453,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
struct camss_clock *clock = &vfe->clock[i];
clock->clk = devm_clk_get(dev, res->clock[i]);
- if (IS_ERR(clock->clk))
+ if (IS_ERR(clock->clk)) {
+ dev_err(dev, "missing clk %s", res->clock[i]);
return PTR_ERR(clock->clk);
+ }
clock->name = res->clock[i];
A bit inconsistent with the messages
stick to "clock %s"
---
bod