This add bluetooth node, in uart9 add RTS node in pinctrl.
Co-developed-by: Muhammed Efe Cetin <efectn@xxxxxxxxxxxxxx>
Signed-off-by: Muhammed Efe Cetin <efectn@xxxxxxxxxxxxxx>
Signed-off-by: Jacobe Zang <jacobe.zang@xxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 8c0bc675690dd..3b6286461a746 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -750,8 +750,15 @@ &uart2 {
&uart9 {
pinctrl-names = "default";
- pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+ pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reset_pin &bt_wake_host_irq &bt_wake_pin>;
+ shutdown-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+ };
};
&u2phy0 {
--
2.34.1
