> -----Original Message----- > From: Jonathan Cameron <jic23@xxxxxxxxxx> > Sent: Sunday, May 12, 2024 12:25 AM > To: David Lechner <dlechner@xxxxxxxxxxxx> > Cc: Tinaco, Mariel <Mariel.Tinaco@xxxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Lars-Peter Clausen > <lars@xxxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Krzysztof Kozlowski > <krzk+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Liam Girdwood > <lgirdwood@xxxxxxxxx>; Mark Brown <broonie@xxxxxxxxxx>; Hennerich, > Michael <Michael.Hennerich@xxxxxxxxxx>; Marcelo Schmitt > <marcelo.schmitt1@xxxxxxxxx>; Dimitri Fedrau <dima.fedrau@xxxxxxxxx>; > Guenter Roeck <linux@xxxxxxxxxxxx> > Subject: Re: [PATCH 1/2] dt-bindings: iio: dac: add docs for ad8460 > > [External] > > On Fri, 10 May 2024 12:28:19 -0500 > David Lechner <dlechner@xxxxxxxxxxxx> wrote: > > > On Fri, May 10, 2024 at 1:42 AM Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx> > wrote: > > > > > > This adds the bindings documentation for the 14-bit High Voltage, > > > High Current, Waveform Generator Digital-to-Analog converter. > > > > > > Signed-off-by: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx> > > > --- > > > .../bindings/iio/dac/adi,ad8460.yaml | 67 +++++++++++++++++++ > > > MAINTAINERS | 7 ++ > > > 2 files changed, 74 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml > > > > > > diff --git > > > a/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml > > > b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml > > > new file mode 100644 > > > index 000000000..924f76209 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml > > > @@ -0,0 +1,67 @@ > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright > > > +2024 Analog Devices Inc. > > > +%YAML 1.2 > > > +--- > > > +$id: > > > +https://urldefense.com/v3/__http://devicetree.org/schemas/iio/dac/a > > > > +di,ad8460.yaml*__;Iw!!A3Ni8CS0y2Y!6gGs7KbAH3BGqwLcGM0Yihd9U4zdncT > ai > > > +eQzg6e_e5cN4fl2NnTYjro4r3D2bqynKuOHDTnLw-cBN74x$ > > > +$schema: > > > +https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core > > > > +.yaml*__;Iw!!A3Ni8CS0y2Y!6gGs7KbAH3BGqwLcGM0Yihd9U4zdncTaieQzg6e_ > e5 > > > +cN4fl2NnTYjro4r3D2bqynKuOHDTnLw11zc2OH$ > > > + > > > +title: Analog Devices AD8460 DAC > > > + > > > +maintainers: > > > + - Mariel Tinaco <mariel.tinaco@xxxxxxxxxx> > > > + > > > +description: | > > > + Analog Devices AD8460 110 V High Voltage, 1 A High Current, > > > + Arbitrary Waveform Generator with Integrated 14-Bit High Speed > > > +DAC > > > + > > > +https://www.analog.com/media/en/technical-documentation/data-sheets > > > +/ad8460.pdf > > > + > > > +properties: > > > + compatible: > > > + enum: > > > + - adi,ad8460 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + spi-max-frequency: > > > + maximum: 20000000 > > > + > > > + vref-supply: > > > > It would be nice to make the property name match the pin name since > > there is more than one reference voltage input. > > > > refio-1p2v-supply: > > > > > + description: Drive voltage in the range of 1.2V maximum to as low as > > > + low as 0.12V through the REF_IO pin to adjust full scale > > > + output span > > > > I don't seen anything in the datasheet named REF_IO. Is this a typo > > and it should be REFIO_1P2V? > > > > > + > > > + clocks: > > > + description: The clock for the DAC. This is the sync clock > > > + > > > + adi,rset-ohms: > > > + description: Specify value of external resistor connected to FS_ADJ pin > > > + to establish internal HVDAC's reference current I_REF > > > + minimum: 2000 > > > + maximum: 20000 > > > + > > > > I see lots more pins on the datasheet, many of which should be trivial > > to add bindings for (we prefer to have the bindings as complete as > > possible even if the driver doesn't implement everything). Potential > > candidates: > > > > sdn-reset-gpios: (active high) > > reset-gpios: (active low) > > sdn-io-gpios: (active high) > > > > hvcc-supply: > > hvee-supply: > > vcc-5v-supply: > > vref-5v-supply: > > dvdd-3p3v-supply: > > avdd-3p3v-supply: > > > > It also looks like there is a parallel interface for data, so I would > > expect to see an io-backends property that links to the PHY used for > > handling that. > > > Ultimately yes, but the parallel interface might require some decisions on binding > that are non obvious until it's actually implemented. So maybe don't need that > bit from the start. The rest I agree should be here. > Added these parameters to the device tree bindings. Not necessarily to the driver > > > > > +required: > > > + - compatible > > > + - reg > > > + - clocks > > > + > > > +allOf: > > > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + > > > + spi { > > > + dac@0 { > > > + compatible = "adi,ad8460"; > > > + reg = <0>; > > > + spi-max-frequency = <8000000>; > > > + adi,rset-ohms = <2000>; > > > + > > > + vref-supply = <&vrefio>; > > > + clocks = <&sync_ext_clk>; > > > + }; > > > + }; > > > + > > > +... > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > index 758c202ec..dae93df2a 100644 > > > --- a/MAINTAINERS > > > +++ b/MAINTAINERS > > > @@ -1234,6 +1234,13 @@ W: https://ez.analog.com/linux-software- > drivers > > > F: Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > F: drivers/iio/adc/ad7780.c > > > > > > +ANALOG DEVICES INC AD8460 DRIVER > > > +M: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx> > > > +L: linux-iio@xxxxxxxxxxxxxxx > > > +S: Supported > > > +W: https://ez.analog.com/linux-software-drivers > > > +F: Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml > > > + > > > ANALOG DEVICES INC AD9739a DRIVER > > > M: Nuno Sa <nuno.sa@xxxxxxxxxx> > > > M: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx> > > > -- > > > 2.34.1 > > > > > >