Hi, Am Sonntag, 23. Juni 2024, 22:14:14 CEST schrieb FUKAUMI Naoki: > Radxa ROCK Pi E v1.2x and ROCK Pi E v3.0 share most of their parts. > prepare rk3328-rock-pi-e-base.dtsi as a common dtsi for both boards. > > Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx> generell comment, please don't send multiple revisions on the same day. People often look at patches in some form of queue, so please give people time to look at patches, before sending new revisions. > Changes in v3: > - move mmc aliases from base to board dts. no functional change > Changes in v2: > - include changes for rk3328-rock-pi-e.dts to make dtb buildable > --- > .../dts/rockchip/rk3328-rock-pi-e-base.dtsi | 440 ++++++++++++++++++ > .../boot/dts/rockchip/rk3328-rock-pi-e.dts | 432 +---------------- This worries me. As the new dtsi should be largely similar to the original board dts, this should have triggered the rename detection and produce a much shorter and much more readable diff instead of having the full content of removes and inserts. I.e. the diff should look somewhat similar to Dragans recent dts file move: https://lore.kernel.org/linux-rockchip/9ffedc0e2ca7f167d9d795b2a8f43cb9f56a653b.1717923308.git.dsimic@xxxxxxxxxxx/ So please check for non-standard patch-formatting options in your git config Thanks a lot Heiko > 2 files changed, 441 insertions(+), 431 deletions(-) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi > > diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi > new file mode 100644 > index 000000000000..1da518fd31fd > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi > @@ -0,0 +1,440 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * (C) Copyright 2020 Chen-Yu Tsai <wens@xxxxxxxx> > + * > + * Based on ./rk3328-rock64.dts, which is > + * > + * Copyright (c) 2017 PINE64 > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/rockchip.h> > + > +#include "rk3328.dtsi" > + > +/ { > + aliases { > + ethernet0 = &gmac2io; > + ethernet1 = &gmac2phy; > + }; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + adc-keys { > + compatible = "adc-keys"; > + io-channels = <&saradc 0>; > + io-channel-names = "buttons"; > + keyup-threshold-microvolt = <1750000>; > + > + /* This button is unpopulated out of the factory. */ > + button-recovery { > + label = "Recovery"; > + linux,code = <KEY_VENDOR>; > + press-threshold-microvolt = <10000>; > + }; > + }; > + > + gmac_clkin: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "gmac_clkin"; > + #clock-cells = <0>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-0 = <&led_pin>; > + pinctrl-names = "default"; > + > + led-0 { > + color = <LED_COLOR_ID_BLUE>; > + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + vcc_sd: sdmmc-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0m1_pin>; > + regulator-name = "vcc_sd"; > + regulator-boot-on; > + vin-supply = <&vcc_io>; > + }; > + > + vcc_host_5v: vcc-host-5v-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb30_host_drv>; > + enable-active-high; > + regulator-name = "vcc_host_5v"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + }; > + > + vcc_sys: vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vcc_wifi: vcc-wifi-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_en>; > + regulator-name = "vcc_wifi"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_io>; > + }; > +}; > + > +&analog_sound { > + status = "okay"; > +}; > + > +&codec { > + status = "okay"; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&emmc { > + bus-width = <8>; > + cap-mmc-highspeed; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; > + vmmc-supply = <&vcc_io>; > + vqmmc-supply = <&vcc18_emmc>; > + status = "okay"; > +}; > + > +&gmac2io { > + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; > + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; > + clock_in_out = "input"; > + phy-handle = <&rtl8211>; > + phy-mode = "rgmii"; > + phy-supply = <&vcc_io>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmiim1_pins>; > + snps,aal; > + snps,rxpbl = <0x4>; > + snps,txpbl = <0x4>; > + tx_delay = <0x26>; > + rx_delay = <0x11>; > + status = "okay"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + rtl8211: ethernet-phy@1 { > + reg = <1>; > + pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>; > + pinctrl-names = "default"; > + interrupt-parent = <&gpio1>; > + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; > + reset-assert-us = <10000>; > + reset-deassert-us = <50000>; > + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; > + }; > + }; > +}; > + > +&gmac2phy { > + status = "okay"; > +}; > + > +&gpio0 { > + gpio-line-names = > + /* GPIO0_A0 - A7 */ > + "", "", "", "", "", "", "", "", > + /* GPIO0_B0 - B7 */ > + "", "", "", "", "", "", "", "", > + /* GPIO0_C0 - C7 */ > + "", "", "", "", "", "", "", "", > + /* GPIO0_D0 - D7 */ > + "", "", "", "pin-15 [GPIO0_D3]", "", "", "", ""; > +}; > + > +&gpio1 { > + gpio-line-names = > + /* GPIO1_A0 - A7 */ > + "", "", "", "", "", "", "", "", > + /* GPIO1_B0 - B7 */ > + "", "", "", "", "", "", "", "", > + /* GPIO1_C0 - C7 */ > + "", "", "", "", "", "", "", "", > + /* GPIO1_D0 - D7 */ > + "", "", "", "", "pin-07 [GPIO1_D4]", "", "", ""; > +}; > + > +&gpio2 { > + gpio-line-names = > + /* GPIO2_A0 - A7 */ > + "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]", > + "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]", > + "pin-33 [GPIO2_A6]", "", > + /* GPIO2_B0 - B7 */ > + "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]", > + /* GPIO2_C0 - C7 */ > + "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]", > + "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]", > + "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]", > + /* GPIO2_D0 - D7 */ > + "", "", "", "", "", "", "", ""; > +}; > + > +&gpio3 { > + gpio-line-names = > + /* GPIO3_A0 - A7 */ > + "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]", > + "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "", > + /* GPIO3_B0 - B7 */ > + "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "", > + /* GPIO3_C0 - C7 */ > + "", "", "", "", "", "", "", "", > + /* GPIO3_D0 - D7 */ > + "", "", "", "", "", "", "", ""; > +}; > + > +&i2c1 { > + status = "okay"; > + > + rk805: pmic@18 { > + compatible = "rockchip,rk805"; > + reg = <0x18>; > + interrupt-parent = <&gpio0>; > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk805-clkout2"; > + gpio-controller; > + #gpio-cells = <2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc_sys>; > + vcc2-supply = <&vcc_sys>; > + vcc3-supply = <&vcc_sys>; > + vcc4-supply = <&vcc_sys>; > + vcc5-supply = <&vcc_io>; > + vcc6-supply = <&vcc_sys>; > + > + regulators { > + vdd_log: DCDC_REG1 { > + regulator-name = "vdd_log"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1450000>; > + regulator-ramp-delay = <12500>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1000000>; > + }; > + }; > + > + vdd_arm: DCDC_REG2 { > + regulator-name = "vdd_arm"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1450000>; > + regulator-ramp-delay = <12500>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <950000>; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_io: DCDC_REG4 { > + regulator-name = "vcc_io"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcc_18: LDO_REG1 { > + regulator-name = "vcc_18"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc18_emmc: LDO_REG2 { > + regulator-name = "vcc18_emmc"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd_10: LDO_REG3 { > + regulator-name = "vdd_10"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1000000>; > + }; > + }; > + }; > + }; > +}; > + > +&i2s1 { > + status = "okay"; > +}; > + > +&io_domains { > + pmuio-supply = <&vcc_io>; > + vccio1-supply = <&vcc_io>; > + vccio2-supply = <&vcc18_emmc>; > + vccio3-supply = <&vcc_io>; > + vccio4-supply = <&vcc_io>; > + vccio5-supply = <&vcc_io>; > + vccio6-supply = <&vcc_io>; > + status = "okay"; > +}; > + > +&pinctrl { > + ephy { > + eth_phy_int_pin: eth-phy-int-pin { > + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + eth_phy_reset_pin: eth-phy-reset-pin { > + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + leds { > + led_pin: led-pin { > + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb3 { > + usb30_host_drv: usb30-host-drv { > + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + wifi { > + wifi_en: wifi-en { > + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-sd-highspeed; > + disable-wp; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; > + vmmc-supply = <&vcc_sd>; > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcc_18>; > + status = "okay"; > +}; > + > +&tsadc { > + status = "okay"; > +}; > + > +&u2phy { > + status = "okay"; > +}; > + > +&u2phy_host { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usbdrd3 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts > index a608a219543e..cbeb2e567bf9 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts > @@ -1,445 +1,15 @@ > // SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * (C) Copyright 2020 Chen-Yu Tsai <wens@xxxxxxxx> > - * > - * Based on ./rk3328-rock64.dts, which is > - * > - * Copyright (c) 2017 PINE64 > - */ > > /dts-v1/; > > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/input/input.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > - > -#include "rk3328.dtsi" > +#include "rk3328-rock-pi-e-base.dtsi" > > / { > model = "Radxa ROCK Pi E"; > compatible = "radxa,rockpi-e", "rockchip,rk3328"; > > aliases { > - ethernet0 = &gmac2io; > - ethernet1 = &gmac2phy; > mmc0 = &sdmmc; > mmc1 = &emmc; > }; > - > - chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - adc-keys { > - compatible = "adc-keys"; > - io-channels = <&saradc 0>; > - io-channel-names = "buttons"; > - keyup-threshold-microvolt = <1750000>; > - > - /* This button is unpopulated out of the factory. */ > - button-recovery { > - label = "Recovery"; > - linux,code = <KEY_VENDOR>; > - press-threshold-microvolt = <10000>; > - }; > - }; > - > - gmac_clkin: external-gmac-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac_clkin"; > - #clock-cells = <0>; > - }; > - > - leds { > - compatible = "gpio-leds"; > - pinctrl-0 = <&led_pin>; > - pinctrl-names = "default"; > - > - led-0 { > - color = <LED_COLOR_ID_BLUE>; > - gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; > - linux,default-trigger = "heartbeat"; > - }; > - }; > - > - vcc_sd: sdmmc-regulator { > - compatible = "regulator-fixed"; > - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0m1_pin>; > - regulator-name = "vcc_sd"; > - regulator-boot-on; > - vin-supply = <&vcc_io>; > - }; > - > - vcc_host_5v: vcc-host-5v-regulator { > - compatible = "regulator-fixed"; > - gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&usb30_host_drv>; > - enable-active-high; > - regulator-name = "vcc_host_5v"; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc_sys>; > - }; > - > - vcc_sys: vcc-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc_wifi: vcc-wifi-regulator { > - compatible = "regulator-fixed"; > - gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_en>; > - regulator-name = "vcc_wifi"; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc_io>; > - }; > -}; > - > -&analog_sound { > - status = "okay"; > -}; > - > -&codec { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_arm>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_arm>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_arm>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_arm>; > -}; > - > -&emmc { > - bus-width = <8>; > - cap-mmc-highspeed; > - mmc-ddr-1_8v; > - mmc-hs200-1_8v; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; > - vmmc-supply = <&vcc_io>; > - vqmmc-supply = <&vcc18_emmc>; > - status = "okay"; > -}; > - > -&gmac2io { > - assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; > - assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; > - clock_in_out = "input"; > - phy-handle = <&rtl8211>; > - phy-mode = "rgmii"; > - phy-supply = <&vcc_io>; > - pinctrl-names = "default"; > - pinctrl-0 = <&rgmiim1_pins>; > - snps,aal; > - snps,rxpbl = <0x4>; > - snps,txpbl = <0x4>; > - tx_delay = <0x26>; > - rx_delay = <0x11>; > - status = "okay"; > - > - mdio { > - compatible = "snps,dwmac-mdio"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - rtl8211: ethernet-phy@1 { > - reg = <1>; > - pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>; > - pinctrl-names = "default"; > - interrupt-parent = <&gpio1>; > - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; > - reset-assert-us = <10000>; > - reset-deassert-us = <50000>; > - reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; > - }; > - }; > -}; > - > -&gmac2phy { > - status = "okay"; > -}; > - > -&gpio0 { > - gpio-line-names = > - /* GPIO0_A0 - A7 */ > - "", "", "", "", "", "", "", "", > - /* GPIO0_B0 - B7 */ > - "", "", "", "", "", "", "", "", > - /* GPIO0_C0 - C7 */ > - "", "", "", "", "", "", "", "", > - /* GPIO0_D0 - D7 */ > - "", "", "", "pin-15 [GPIO0_D3]", "", "", "", ""; > -}; > - > -&gpio1 { > - gpio-line-names = > - /* GPIO1_A0 - A7 */ > - "", "", "", "", "", "", "", "", > - /* GPIO1_B0 - B7 */ > - "", "", "", "", "", "", "", "", > - /* GPIO1_C0 - C7 */ > - "", "", "", "", "", "", "", "", > - /* GPIO1_D0 - D7 */ > - "", "", "", "", "pin-07 [GPIO1_D4]", "", "", ""; > -}; > - > -&gpio2 { > - gpio-line-names = > - /* GPIO2_A0 - A7 */ > - "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]", > - "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]", > - "pin-33 [GPIO2_A6]", "", > - /* GPIO2_B0 - B7 */ > - "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]", > - /* GPIO2_C0 - C7 */ > - "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]", > - "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]", > - "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]", > - /* GPIO2_D0 - D7 */ > - "", "", "", "", "", "", "", ""; > -}; > - > -&gpio3 { > - gpio-line-names = > - /* GPIO3_A0 - A7 */ > - "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]", > - "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "", > - /* GPIO3_B0 - B7 */ > - "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "", > - /* GPIO3_C0 - C7 */ > - "", "", "", "", "", "", "", "", > - /* GPIO3_D0 - D7 */ > - "", "", "", "", "", "", "", ""; > -}; > - > -&i2c1 { > - status = "okay"; > - > - rk805: pmic@18 { > - compatible = "rockchip,rk805"; > - reg = <0x18>; > - interrupt-parent = <&gpio0>; > - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - clock-output-names = "xin32k", "rk805-clkout2"; > - gpio-controller; > - #gpio-cells = <2>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc_sys>; > - vcc2-supply = <&vcc_sys>; > - vcc3-supply = <&vcc_sys>; > - vcc4-supply = <&vcc_sys>; > - vcc5-supply = <&vcc_io>; > - vcc6-supply = <&vcc_sys>; > - > - regulators { > - vdd_log: DCDC_REG1 { > - regulator-name = "vdd_log"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1450000>; > - regulator-ramp-delay = <12500>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1000000>; > - }; > - }; > - > - vdd_arm: DCDC_REG2 { > - regulator-name = "vdd_arm"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1450000>; > - regulator-ramp-delay = <12500>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <950000>; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc_io: DCDC_REG4 { > - regulator-name = "vcc_io"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc_18: LDO_REG1 { > - regulator-name = "vcc_18"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcc18_emmc: LDO_REG2 { > - regulator-name = "vcc18_emmc"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdd_10: LDO_REG3 { > - regulator-name = "vdd_10"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1000000>; > - }; > - }; > - }; > - }; > -}; > - > -&i2s1 { > - status = "okay"; > -}; > - > -&io_domains { > - pmuio-supply = <&vcc_io>; > - vccio1-supply = <&vcc_io>; > - vccio2-supply = <&vcc18_emmc>; > - vccio3-supply = <&vcc_io>; > - vccio4-supply = <&vcc_io>; > - vccio5-supply = <&vcc_io>; > - vccio6-supply = <&vcc_io>; > - status = "okay"; > -}; > - > -&pinctrl { > - ephy { > - eth_phy_int_pin: eth-phy-int-pin { > - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - eth_phy_reset_pin: eth-phy-reset-pin { > - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - }; > - > - leds { > - led_pin: led-pin { > - rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb3 { > - usb30_host_drv: usb30-host-drv { > - rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - wifi { > - wifi_en: wifi-en { > - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&sdmmc { > - bus-width = <4>; > - cap-sd-highspeed; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; > - vmmc-supply = <&vcc_sd>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcc_18>; > - status = "okay"; > -}; > - > -&tsadc { > - status = "okay"; > -}; > - > -&u2phy { > - status = "okay"; > -}; > - > -&u2phy_host { > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usbdrd3 { > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > }; >
