Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jun 23, 2024 at 08:46:30PM GMT, Akhil P Oommen wrote:
> On Sun, Jun 23, 2024 at 02:53:17PM +0200, Krzysztof Kozlowski wrote:
> > On 23/06/2024 14:28, Akhil P Oommen wrote:
> > > On Sun, Jun 23, 2024 at 01:17:16PM +0200, Krzysztof Kozlowski wrote:
> > >> On 23/06/2024 13:06, Akhil P Oommen wrote:
> > >>> Add the necessary dt nodes for gpu support in X1E80100.
> > >>>
> > >>> Signed-off-by: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
> > >>> ---
> > >>> +		gmu: gmu@3d6a000 {
> > >>> +			compatible = "qcom,adreno-gmu-x185.1", "qcom,adreno-gmu";
> > >>> +			reg = <0x0 0x03d50000 0x0 0x10000>,
> > >>> +			      <0x0 0x03d6a000 0x0 0x35000>,
> > >>> +			      <0x0 0x0b280000 0x0 0x10000>;
> > >>> +			reg-names =  "rscc", "gmu", "gmu_pdc";
> > >>
> > >> Really, please start testing your patches. Your internal instructions
> > >> tells you to do that, so please follow it carefully. Don't use the
> > >> community as the tool, because you do not want to run checks and
> > >> investigate results.
> > > 
> > > This was obviously tested before (and retested now) and everything works. I am
> > > confused about what you meant. Could you please elaborate a bit? The device
> > > and the compilation/test setup is new for me, so I am wondering if I
> > > made any silly mistake!
> > 
> > Eh, your DTS is not correct, but this could not be pointed out by tests,
> > because the binding does not work. :(
> 
> I reordered both "reg" and "reg-names" arrays based on the address.

The @3d6a000 should match the first reg entry.

> Not sure if
> that is what we are talking about here. Gpu driver uses platform_get_resource_byname()
> to query mmio resources.
> 
> I will retest dt-bindings and dts checks after picking the patches you
> just posted and report back. Is the schema supposed to enforce strict
> order?

In your second hunk in patch 1, you are defining the order of reg,
reg-names, clocks, and clock-names. This creates an ABI between DTB and
implementation where ordering is significant - regardless of Linux using
platform_get_resource_byname().

Regards,
Bjorn

> 
> -Akhil.
> > 
> > I'll fix up the binding and then please test on top of my patch (see
> > your internal guideline about necessary tests before sending any binding
> > or DTS patch).
> > 
> > Best regards,
> > Krzysztof
> > 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux