[PATCH] dt-bindings: net: davinci_emac: Convert to yaml version from txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The davinci_emac is used by several devices which are still maintained,
but to make some improvements, it's necessary to convert from txt to yaml.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
deleted file mode 100644
index 5e3579e72e2d..000000000000
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* Texas Instruments Davinci EMAC
-
-This file provides information, what the device node
-for the davinci_emac interface contains.
-
-Required properties:
-- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
-  "ti,dm816-emac"
-- reg: Offset and length of the register set for the device
-- ti,davinci-ctrl-reg-offset: offset to control register
-- ti,davinci-ctrl-mod-reg-offset: offset to control module register
-- ti,davinci-ctrl-ram-offset: offset to control module ram
-- ti,davinci-ctrl-ram-size: size of control module ram
-- interrupts: interrupt mapping for the davinci emac interrupts sources:
-              4 sources: <Receive Threshold Interrupt
-			  Receive Interrupt
-			  Transmit Interrupt
-			  Miscellaneous Interrupt>
-
-Optional properties:
-- phy-handle: See ethernet.txt file in the same directory.
-              If absent, davinci_emac driver defaults to 100/FULL.
-- ti,davinci-rmii-en: 1 byte, 1 means use RMII
-- ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Example (enbw_cmc board):
-	eth0: emac@1e20000 {
-		compatible = "ti,davinci-dm6467-emac";
-		reg = <0x220000 0x4000>;
-		ti,davinci-ctrl-reg-offset = <0x3000>;
-		ti,davinci-ctrl-mod-reg-offset = <0x2000>;
-		ti,davinci-ctrl-ram-offset = <0>;
-		ti,davinci-ctrl-ram-size = <0x2000>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		interrupts = <33
-				34
-				35
-				36
-				>;
-		interrupt-parent = <&intc>;
-	};
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.yaml b/Documentation/devicetree/bindings/net/davinci_emac.yaml
new file mode 100644
index 000000000000..4c2640aef8a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davinci_emac.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/davinci_emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Davici EMAC
+
+maintainers:
+  - Adam Ford <aford@xxxxxxxxx>
+
+description:
+  Ethernet based on the Programmable Real-Time Unit and Industrial
+  Communication Subsystem.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,davinci-dm6467-emac # da850
+          - ti,dm816-emac
+          - ti,am3517-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ick
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  local-mac-address: true
+  mac-address: true
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global system controller on
+      to enable/disable interrupts
+
+  ti,davinci-ctrl-reg-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to control register
+
+  ti,davinci-ctrl-mod-reg-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to control module register
+
+  ti,davinci-ctrl-ram-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to control module ram
+
+  ti,davinci-ctrl-ram-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of control module ram
+
+  ti,davinci-rmii-en:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      RMII enable means use RMII
+
+  ti,davinci-no-bd-ram:
+    type: boolean
+    description:
+      Enable if EMAC have BD RAM
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - ti,davinci-ctrl-reg-offset
+  - ti,davinci-ctrl-mod-reg-offset
+  - ti,davinci-ctrl-ram-offset
+  - ti,davinci-ctrl-ram-size
+
+examples:
+  - |
+    eth0: ethernet@220000 {
+      compatible = "ti,davinci-dm6467-emac";
+      reg = <0x220000 0x4000>;
+      ti,davinci-ctrl-reg-offset = <0x3000>;
+      ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+      ti,davinci-ctrl-ram-offset = <0>;
+      ti,davinci-ctrl-ram-size = <0x2000>;
+      local-mac-address = [ 00 00 00 00 00 00 ];
+      interrupts = <33>, <34>, <35>,<36>;
+      clocks = <&psc1 5>;
+      power-domains = <&psc1 5>;
+      status = "disabled";
+    };
+
-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux