Presented patches add support for Odroid's U3 optional CPU FAN, which uses PWM subsystem for low level control. After successful probe it registers itself as a cooling device for thermal subsystem. This driver also supports devices without DTS specified. To provide correct functionality, new properties to device tree description for Exynos4412 and in particular Odroid U3 have been added. Those patches were tested at Exynos4412 - Odroid U3 board. Patches were applied on: linux-soc-thermal/fixes branch (Linux v4.0-rc2) SHA1: ad83a2d87bff355750a17dd00aec563eb9f9d388 Kamil Debski (1): ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski (5): Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle hwmon: pwm-fan: Read PWM FAN configuration from device tree hwmon: pwm-fan: Code for using PWM FAN as a cooling device .../devicetree/bindings/hwmon/pwm-fan.txt | 29 +++- arch/arm/boot/dts/exynos4.dtsi | 2 +- arch/arm/boot/dts/exynos4412-odroidu3.dts | 43 ++++++ drivers/hwmon/pwm-fan.c | 172 +++++++++++++++++++-- 4 files changed, 229 insertions(+), 17 deletions(-) -- 2.0.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html