This commit adds SFC node for Radxa ROCK 5A.
since sdhci and sfc on RK3588s share pins(i.e. exclusive), it cannot
be enabled both nodes at the same time. so status = "okay" is omitted
here.
you may be able to enable sfc (and disable sdhci) by fdt overlay.
SPI NOR flash chip may vary, so use safe(lowest) spi-max-frequency.
Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index c0f6a4b1493f..03ed48246d36 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -377,6 +377,19 @@ &sdmmc {
status = "okay";
};
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim0_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
&spi2 {
status = "okay";
assigned-clocks = <&cru CLK_SPI2>;
--
2.43.0
