From: Chen-Yu Tsai <wens@xxxxxxxx> Now that the bindings for the system LDOs have been merged, the nodes for the system LDOs can be added. These are used on the ClockworkPi. This was originally part of Samuel's D1 device tree series [1], but was dropped in v5 as the regulator bindings weren't merged at the time. [1] https://lore.kernel.org/linux-sunxi/20221231233851.24923-1-samuel@xxxxxxxxxxxx/ Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> --- arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 5a9d7f5a75b4..e4175adb028d 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -396,6 +396,17 @@ syscon: syscon@3000000 { ranges; #address-cells = <1>; #size-cells = <1>; + + regulators@3000150 { + compatible = "allwinner,sun20i-d1-system-ldos"; + reg = <0x3000150 0x4>; + + reg_ldoa: ldoa { + }; + + reg_ldob: ldob { + }; + }; }; dma: dma-controller@3002000 { -- 2.39.2
