[PATCH 1/2] arm: dts: ti: k3-am62: Add GPMC and ELM nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nitin Yadav <n-yadav@xxxxxx>

Add GPMC and ELM device tree nodes for AM62 SoC family.

Signed-off-by: Nitin Yadav <n-yadav@xxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 29 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62.dtsi      |  2 ++
 2 files changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 00776a9987c1..e7e7cdc24e3d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -1053,4 +1053,33 @@ dphy0: phy@30110000 {
 		status = "disabled";
 	};
 
+	gpmc0: memory-controller@3b000000 {
+		compatible = "ti,am64-gpmc";
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 80 0>;
+		clock-names = "fck";
+		reg = <0x00 0x03b000000 0x00 0x400>,
+		      <0x00 0x050000000 0x00 0x8000000>;
+		reg-names = "cfg", "data";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		gpmc,num-cs = <3>;
+		gpmc,num-waitpins = <2>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "disabled";
+	};
+
+	elm0: ecc@25010000 {
+		compatible = "ti,am64-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 54 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index f0781f2bea29..bfb55ca11323 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -68,11 +68,13 @@ cbass_main: bus@f0000 {
 			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
 			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
 			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
 			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
 			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
 			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
 			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
 			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */
 			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
 			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux