On 19/06/24 15:22, Jayesh Choudhary wrote:
> &wkup_pmx2 {
> @@ -881,6 +917,14 @@ exp1: gpio@20 {
> "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
> "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
> "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
> +
> + p12-hog {
> + /* P12 - AUDIO_MUX_SEL */
> + gpio-hog;
> + gpios = <12 GPIO_ACTIVE_HIGH>;
> + output-low;
> + line-name = "AUDIO_MUX_SEL";
> + };
> };
>
> exp2: gpio@22 {
> @@ -896,6 +940,22 @@ exp2: gpio@22 {
> "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
> "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
> "USER_INPUT1", "USER_LED1", "USER_LED2";
> +
> + p13-hog {
> + /* P13 - CANUART_MUX_SEL0 */
> + gpio-hog;
> + gpios = <13 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "CANUART_MUX_SEL0";
> + };
> +
> + p15-hog {
> + /* P15 - CANUART_MUX1_SEL1 */
> + gpio-hog;
> + gpios = <15 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "CANUART_MUX1_SEL1";
> + };
> };
> };
Does this break CAN instances already enabled in the dts? If you
consider making this a overlay as defaults seem to be set for CAN
--
Regards
Vignesh
