Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration

[Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>]

On 06/19, Mark Brown wrote:
> On Tue, Jun 18, 2024 at 08:10:44PM -0300, Marcelo Schmitt wrote:
> 
> > First replies to v3 brought the idea of having a feature detection mechanism.
> > I didn't really get how to do that. If feature detection is required, can
> > somebody please provide some pointers on how to implement that?
> 
> Look at the checks in spi_setup() for bad_bits.  

Yes, I added MOSI idle configuration bits to bad_bits so spi_setup() fails
if the feature is requested but not supported:

	bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD |
				 SPI_NO_TX | SPI_NO_RX | SPI_MOSI_IDLE_LOW |
				 SPI_MOSI_IDLE_HIGH);

am I still missing anything?

Thanks,
Marcelo