use GPIO0_A2 as interrupt pin for PMIC. GPIO2_A6 was used for
pre-production board.
Fixes: b918e81f2145 ("arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E")
Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index f09d60bbe6c4..a608a219543e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -241,8 +241,8 @@ &i2c1 {
rk805: pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
- interrupt-parent = <&gpio2>;
- interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk805-clkout2";
gpio-controller;
--
2.43.0
