Convert fsl-fman from txt to yaml format and split it fsl,fman.yam, fsl,fman-port.yaml, fsl-muram.yaml, fsl-mdio.yaml. Addition changes: fsl,fman.yaml: - Fixed interrupts in example. - Fixed ethernet@e8000 miss } in example. - ptp-timer add label in example. - Ref to new fsl,fman*.yaml. - Reorder property in example. - Keep only one example. - Add const for #address-cells and #size-cells. - Use defined interrupt type. - ptp example use node name phc. fsl,fman-port: - Keep only one example. fsl,fman-mdio: - Add little-endian property. - Add ref to mdio.yaml. - Remove suppress-preamble. - Add #address-cells and #size-cells in example. - Remove clock-frequency, which already describe in mmio.yaml. fsl,muram.yaml: - Add reg property. - Remove range property. - Use reg instead of range in example. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- Change from v1 to v2 - Fix make refcheckdocs warning. - remove ranges in fsl,muram.yaml and all examples. - Only keep one example - Add const for #address-cells and #size-cells. - Compatible is always the first property. reg follows, third ranges. - Using define interrupt type --- .../devicetree/bindings/net/fsl,fman-mdio.yaml | 123 +++++ .../devicetree/bindings/net/fsl,fman-muram.yaml | 40 ++ .../devicetree/bindings/net/fsl,fman-port.yaml | 75 +++ .../devicetree/bindings/net/fsl,fman.yaml | 204 ++++++++ Documentation/devicetree/bindings/net/fsl-fman.txt | 548 --------------------- MAINTAINERS | 2 +- 6 files changed, 443 insertions(+), 549 deletions(-) diff --git a/Documentation/devicetree/bindings/net/fsl,fman-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,fman-mdio.yaml new file mode 100644 index 0000000000000..6b2c0aa407a23 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-mdio.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Frame Manager MDIO Device + +maintainers: + - Frank Li <Frank.Li@xxxxxxx> + +description: FMan MDIO Node. + The MDIO is a bus to which the PHY devices are connected. + +properties: + compatible: + enum: + - fsl,fman-mdio + - fsl,fman-xmdio + - fsl,fman-memac-mdio + description: + Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2. + Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2. + Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from + FMan v3. + + reg: + maxItems: 1 + + clocks: + items: + - description: A reference to the input clock of the controller + from which the MDC frequency is derived. + + interrupts: + maxItems: 1 + + fsl,fman-internal-mdio: + $ref: /schemas/types.yaml#/definitions/flag + description: + Fman has internal MDIO for internal PCS(Physical + Coding Sublayer) PHYs and external MDIO for external PHYs. + The settings and programming routines for internal/external + MDIO are different. Must be included for internal MDIO. + + fsl,erratum-a009885: + $ref: /schemas/types.yaml#/definitions/flag + description: Indicates the presence of the A009885 + erratum describing that the contents of MDIO_DATA may + become corrupt unless it is read within 16 MDC cycles + of MDIO_CFG[BSY] being cleared, when performing an + MDIO read operation. + + fsl,erratum-a011043: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates the presence of the A011043 erratum + describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely + set when reading internal PCS registers. MDIO reads to + internal PCS registers may result in having the + MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and + read data (MDIO_DATA[MDIO_DATA]) is correct. + Software may get false read error when reading internal + PCS registers through MDIO. As a workaround, all internal + MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. + + For internal PHY device on internal mdio bus, a PHY node should be created. + See the definition of the PHY node in booting-without-of.txt for an + example of how to define a PHY (Internal PHY has no interrupt line). + - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY. + - For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY. + The PCS PHY address should correspond to the value of the appropriate + MDEV_PORT. + + little-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + IP block is little-endian mode. The default endian mode is big-endian. + +required: + - compatible + - reg + +allOf: + - $ref: mdio.yaml# + +unevaluatedProperties: false + +examples: + - | + mdio@f1000 { + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 2 0 0>; + }; + + - | + mdio@e3120 { + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + fsl,fman-internal-mdio; + #address-cells = <1>; + #size-cells = <0>; + + tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + - | + mdio@f1000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0xf1000 0x1000>; + fsl,fman-internal-mdio; + #address-cells = <1>; + #size-cells = <0>; + + pcsphy6: ethernet-phy@0 { + reg = <0x0>; + }; + }; + diff --git a/Documentation/devicetree/bindings/net/fsl,fman-muram.yaml b/Documentation/devicetree/bindings/net/fsl,fman-muram.yaml new file mode 100644 index 0000000000000..aa71acc7fa5b5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-muram.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-muram.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Frame Manager MURAM Device + +maintainers: + - Frank Li <Frank.Li@xxxxxxx> + +description: | + FMan Internal memory - shared between all the FMan modules. + It contains data structures that are common and written to or read by + the modules. + + FMan internal memory is split into the following parts: + Packet buffering (Tx/Rx FIFOs) + Frames internal context + +properties: + compatible: + enum: + - fsl,fman-muram + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,fman-port.yaml b/Documentation/devicetree/bindings/net/fsl,fman-port.yaml new file mode 100644 index 0000000000000..9de445307830d --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-port.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-port.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Frame Manager Port Device + +maintainers: + - Frank Li <Frank.Li@xxxxxxx> + +description: | + The Frame Manager (FMan) supports several types of hardware ports: + Ethernet receiver (RX) + Ethernet transmitter (TX) + Offline/Host command (O/H) + +properties: + compatible: + enum: + - fsl,fman-v2-port-oh + - fsl,fman-v2-port-rx + - fsl,fman-v2-port-tx + - fsl,fman-v3-port-oh + - fsl,fman-v3-port-rx + - fsl,fman-v3-port-tx + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the hardware port id. + Each hardware port on the FMan has its own hardware PortID. + Super set of all hardware Port IDs available at FMan Reference + Manual under "FMan Hardware Ports in Freescale Devices" table. + + Each hardware port is assigned a 4KB, port-specific page in + the FMan hardware port memory region (which is part of the + FMan memory map). The first 4 KB in the FMan hardware ports + memory region is used for what are called common registers. + The subsequent 63 4KB pages are allocated to the hardware + ports. + The page of a specific port is determined by the cell-index. + + reg: + items: + - description: There is one reg region describing the port + configuration registers. + + fsl,fman-10g-port: + $ref: /schemas/types.yaml#/definitions/flag + description: The default port rate is 1G. + If this property exists, the port is s 10G port. + + fsl,fman-best-effort-port: + $ref: /schemas/types.yaml#/definitions/flag + description: The default port rate is 1G. + Can be defined only if 10G-support is set. + This property marks a best-effort 10G port (10G port that + may not be capable of line rate). + +required: + - compatible + - reg + - cell-index + +additionalProperties: false + +examples: + - | + port@a8000 { + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + cell-index = <0x28>; + }; + diff --git a/Documentation/devicetree/bindings/net/fsl,fman.yaml b/Documentation/devicetree/bindings/net/fsl,fman.yaml new file mode 100644 index 0000000000000..7908f67413dea --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Frame Manager Device + +maintainers: + - Frank Li <Frank.Li@xxxxxxx> + +description: + Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs, + etc.) the FMan node will have child nodes for each of them. + +properties: + compatible: + enum: + - fsl,fman + description: + FMan version can be determined via FM_IP_REV_1 register in the + FMan block. The offset is 0xc4 from the beginning of the + Frame Processing Manager memory map (0xc3000 from the + beginning of the FMan node). + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the index of the FMan unit. + + The cell-index value may be used by the SoC, to identify the + FMan unit in the SoC memory map. In the table below, + there's a description of the cell-index use in each SoC: + + - P1023: + register[bit] FMan unit cell-index + ============================================================ + DEVDISR[1] 1 0 + + - P2041, P3041, P4080 P5020, P5040: + register[bit] FMan unit cell-index + ============================================================ + DCFG_DEVDISR2[6] 1 0 + DCFG_DEVDISR2[14] 2 1 + (Second FM available only in P4080 and P5040) + + - B4860, T1040, T2080, T4240: + register[bit] FMan unit cell-index + ============================================================ + DCFG_CCSR_DEVDISR2[24] 1 0 + DCFG_CCSR_DEVDISR2[25] 2 1 + (Second FM available only in T4240) + + DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in + the specific SoC "Device Configuration/Pin Control" Memory + Map. + + reg: + items: + - description: BMI configuration registers. + - description: QMI configuration registers. + - description: DMA configuration registers. + - description: FPM configuration registers. + - description: FMan controller configuration registers. + minItems: 1 + + ranges: true + + clocks: + maxItems: 1 + + clock-names: + items: + - const: fmanclk + + interrupts: + items: + - description: The first element is associated with the event interrupts. + - description: the second element is associated with the error interrupts. + + fsl,qman-channel-range: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Specifies the range of the available dedicated + channels in the FMan. The first cell specifies the beginning + of the range and the second cell specifies the number of + channels + items: + - description: The first cell specifies the beginning of the range. + - description: | + The second cell specifies the number of channels. + Further information available at: + "Work Queue (WQ) Channel Assignments in the QMan" section + in DPAA Reference Manual. + + fsl,qman: + $ref: /schemas/types.yaml#/definitions/phandle + description: See soc/fsl/qman.txt + + fsl,bman: + $ref: /schemas/types.yaml#/definitions/phandle + description: See soc/fsl/bman.txt + + fsl,erratum-a050385: + $ref: /schemas/types.yaml#/definitions/flag + description: A boolean property. Indicates the presence of the + erratum A050385 which indicates that DMA transactions that are + split can result in a FMan lock. + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + '^muram@[a-f0-9]+$': + $ref: fsl,fman-muram.yaml + + '^port@[a-f0-9]+$': + $ref: fsl,fman-port.yaml + + '^ethernet@[a-f0-9]+$': + $ref: fsl,fman-dtsec.yaml + + '^mdio@[a-f0-9]+$': + $ref: fsl,fman-mdio.yaml + + '^phc@[a-f0-9]+$': + $ref: /schemas/ptp/fsl,ptp.yaml + +required: + - compatible + - cell-index + - reg + - ranges + - clocks + - clock-names + - interrupts + - fsl,qman-channel-range + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + fman@400000 { + compatible = "fsl,fman"; + reg = <0x400000 0x100000>; + ranges = <0 0x400000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + clocks = <&fman_clk>; + clock-names = "fmanclk"; + interrupts = <96 IRQ_TYPE_EDGE_FALLING>, + <16 IRQ_TYPE_EDGE_FALLING>; + fsl,qman-channel-range = <0x40 0xc>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + port@81000 { + cell-index = <1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + fman1_rx_0x8: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + compatible = "fsl,fman-dtsec"; + cell-index = <0>; + reg = <0xe0000 0x1000>; + ptp-timer = <&ptp_timer>; + fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>; + tbi-handle = <&tbi5>; + }; + + ptp_timer: phc@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; + + mdio@f1000 { + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt deleted file mode 100644 index 5e02b4b286f67..0000000000000 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ /dev/null @@ -1,548 +0,0 @@ -============================================================================= -Freescale Frame Manager Device Bindings - -CONTENTS - - FMan Node - - FMan Port Node - - FMan MURAM Node - - FMan dTSEC/XGEC/mEMAC Node - - FMan IEEE 1588 Node - - FMan MDIO Node - - Example - -============================================================================= -FMan Node - -DESCRIPTION - -Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs, -etc.) the FMan node will have child nodes for each of them. - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: Must include "fsl,fman" - FMan version can be determined via FM_IP_REV_1 register in the - FMan block. The offset is 0xc4 from the beginning of the - Frame Processing Manager memory map (0xc3000 from the - beginning of the FMan node). - -- cell-index - Usage: required - Value type: <u32> - Definition: Specifies the index of the FMan unit. - - The cell-index value may be used by the SoC, to identify the - FMan unit in the SoC memory map. In the table below, - there's a description of the cell-index use in each SoC: - - - P1023: - register[bit] FMan unit cell-index - ============================================================ - DEVDISR[1] 1 0 - - - P2041, P3041, P4080 P5020, P5040: - register[bit] FMan unit cell-index - ============================================================ - DCFG_DEVDISR2[6] 1 0 - DCFG_DEVDISR2[14] 2 1 - (Second FM available only in P4080 and P5040) - - - B4860, T1040, T2080, T4240: - register[bit] FMan unit cell-index - ============================================================ - DCFG_CCSR_DEVDISR2[24] 1 0 - DCFG_CCSR_DEVDISR2[25] 2 1 - (Second FM available only in T4240) - - DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in - the specific SoC "Device Configuration/Pin Control" Memory - Map. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the offset of the - following configuration registers: - - BMI configuration registers. - - QMI configuration registers. - - DMA configuration registers. - - FPM configuration registers. - - FMan controller configuration registers. - -- ranges - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - -- clocks - Usage: required - Value type: <prop-encoded-array> - Definition: phandle for the fman input clock. - -- clock-names - usage: required - Value type: <stringlist> - Definition: "fmanclk" for the fman input clock. - -- interrupts - Usage: required - Value type: <prop-encoded-array> - Definition: A pair of IRQs are specified in this property. - The first element is associated with the event interrupts and - the second element is associated with the error interrupts. - -- fsl,qman-channel-range - Usage: required - Value type: <prop-encoded-array> - Definition: Specifies the range of the available dedicated - channels in the FMan. The first cell specifies the beginning - of the range and the second cell specifies the number of - channels. - Further information available at: - "Work Queue (WQ) Channel Assignments in the QMan" section - in DPAA Reference Manual. - -- fsl,qman -- fsl,bman - Usage: required - Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt - -- fsl,erratum-a050385 - Usage: optional - Value type: boolean - Definition: A boolean property. Indicates the presence of the - erratum A050385 which indicates that DMA transactions that are - split can result in a FMan lock. - -============================================================================= -FMan MURAM Node - -DESCRIPTION - -FMan Internal memory - shared between all the FMan modules. -It contains data structures that are common and written to or read by -the modules. -FMan internal memory is split into the following parts: - Packet buffering (Tx/Rx FIFOs) - Frames internal context - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: Must include "fsl,fman-muram" - -- ranges - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - Specifies the multi-user memory offset and the size within - the FMan. - -EXAMPLE - -muram@0 { - compatible = "fsl,fman-muram"; - ranges = <0 0x000000 0x28000>; -}; - -============================================================================= -FMan Port Node - -DESCRIPTION - -The Frame Manager (FMan) supports several types of hardware ports: - Ethernet receiver (RX) - Ethernet transmitter (TX) - Offline/Host command (O/H) - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: A standard property. - Must include one of the following: - - "fsl,fman-v2-port-oh" for FManV2 OH ports - - "fsl,fman-v2-port-rx" for FManV2 RX ports - - "fsl,fman-v2-port-tx" for FManV2 TX ports - - "fsl,fman-v3-port-oh" for FManV3 OH ports - - "fsl,fman-v3-port-rx" for FManV3 RX ports - - "fsl,fman-v3-port-tx" for FManV3 TX ports - -- cell-index - Usage: required - Value type: <u32> - Definition: Specifies the hardware port id. - Each hardware port on the FMan has its own hardware PortID. - Super set of all hardware Port IDs available at FMan Reference - Manual under "FMan Hardware Ports in Freescale Devices" table. - - Each hardware port is assigned a 4KB, port-specific page in - the FMan hardware port memory region (which is part of the - FMan memory map). The first 4 KB in the FMan hardware ports - memory region is used for what are called common registers. - The subsequent 63 4KB pages are allocated to the hardware - ports. - The page of a specific port is determined by the cell-index. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: There is one reg region describing the port - configuration registers. - -- fsl,fman-10g-port - Usage: optional - Value type: boolean - Definition: The default port rate is 1G. - If this property exists, the port is s 10G port. - -- fsl,fman-best-effort-port - Usage: optional - Value type: boolean - Definition: Can be defined only if 10G-support is set. - This property marks a best-effort 10G port (10G port that - may not be capable of line rate). - -EXAMPLE - -port@a8000 { - cell-index = <0x28>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa8000 0x1000>; -}; - -port@88000 { - cell-index = <0x8>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x88000 0x1000>; -}; - -port@81000 { - cell-index = <0x1>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x81000 0x1000>; -}; - -============================================================================= -FMan dTSEC/XGEC/mEMAC Node - -Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml - -============================================================================ -FMan IEEE 1588 Node - -Refer to Documentation/devicetree/bindings/ptp/fsl,ptp.yaml - -============================================================================= -FMan MDIO Node - -DESCRIPTION - -The MDIO is a bus to which the PHY devices are connected. - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: A standard property. - Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2. - Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2. - Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from - FMan v3. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - -- clocks - Usage: optional - Value type: <phandle> - Definition: A reference to the input clock of the controller - from which the MDC frequency is derived. - -- clock-frequency - Usage: optional - Value type: <u32> - Definition: Specifies the external MDC frequency, in Hertz, to - be used. Requires that the input clock is specified in the - "clocks" property. See also: mdio.yaml. - -- suppress-preamble - Usage: optional - Value type: <boolean> - Definition: Disable generation of preamble bits. See also: - mdio.yaml. - -- interrupts - Usage: required for external MDIO - Value type: <prop-encoded-array> - Definition: Event interrupt of external MDIO controller. - -- fsl,fman-internal-mdio - Usage: required for internal MDIO - Value type: boolean - Definition: Fman has internal MDIO for internal PCS(Physical - Coding Sublayer) PHYs and external MDIO for external PHYs. - The settings and programming routines for internal/external - MDIO are different. Must be included for internal MDIO. - -- fsl,erratum-a009885 - Usage: optional - Value type: <boolean> - Definition: Indicates the presence of the A009885 - erratum describing that the contents of MDIO_DATA may - become corrupt unless it is read within 16 MDC cycles - of MDIO_CFG[BSY] being cleared, when performing an - MDIO read operation. - -- fsl,erratum-a011043 - Usage: optional - Value type: <boolean> - Definition: Indicates the presence of the A011043 erratum - describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely - set when reading internal PCS registers. MDIO reads to - internal PCS registers may result in having the - MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and - read data (MDIO_DATA[MDIO_DATA]) is correct. - Software may get false read error when reading internal - PCS registers through MDIO. As a workaround, all internal - MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. - -For internal PHY device on internal mdio bus, a PHY node should be created. -See the definition of the PHY node in booting-without-of.txt for an -example of how to define a PHY (Internal PHY has no interrupt line). -- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY. -- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY. - The PCS PHY address should correspond to the value of the appropriate - MDEV_PORT. - -EXAMPLE - -Example for FMan v2 external MDIO: - -mdio@f1000 { - compatible = "fsl,fman-xmdio"; - reg = <0xf1000 0x1000>; - interrupts = <101 2 0 0>; -}; - -Example for FMan v2 internal MDIO: - -mdio@e3120 { - compatible = "fsl,fman-mdio"; - reg = <0xe3120 0xee0>; - fsl,fman-internal-mdio; - - tbi1: tbi-phy@8 { - reg = <0x8>; - device_type = "tbi-phy"; - }; -}; - -Example for FMan v3 internal MDIO: - -mdio@f1000 { - compatible = "fsl,fman-memac-mdio"; - reg = <0xf1000 0x1000>; - fsl,fman-internal-mdio; - - pcsphy6: ethernet-phy@0 { - reg = <0x0>; - }; -}; - -============================================================================= -Example - -fman@400000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - compatible = "fsl,fman" - ranges = <0 0x400000 0x100000>; - reg = <0x400000 0x100000>; - clocks = <&fman_clk>; - clock-names = "fmanclk"; - interrupts = < - 96 2 0 0 - 16 2 1 1>; - fsl,qman-channel-range = <0x40 0xc>; - - muram@0 { - compatible = "fsl,fman-muram"; - reg = <0x0 0x28000>; - }; - - port@81000 { - cell-index = <1>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x81000 0x1000>; - }; - - port@82000 { - cell-index = <2>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x82000 0x1000>; - }; - - port@83000 { - cell-index = <3>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x83000 0x1000>; - }; - - port@84000 { - cell-index = <4>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x84000 0x1000>; - }; - - port@85000 { - cell-index = <5>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x85000 0x1000>; - }; - - port@86000 { - cell-index = <6>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x86000 0x1000>; - }; - - fman1_rx_0x8: port@88000 { - cell-index = <0x8>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x88000 0x1000>; - }; - - fman1_rx_0x9: port@89000 { - cell-index = <0x9>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x89000 0x1000>; - }; - - fman1_rx_0xa: port@8a000 { - cell-index = <0xa>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x8a000 0x1000>; - }; - - fman1_rx_0xb: port@8b000 { - cell-index = <0xb>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x8b000 0x1000>; - }; - - fman1_rx_0xc: port@8c000 { - cell-index = <0xc>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x8c000 0x1000>; - }; - - fman1_rx_0x10: port@90000 { - cell-index = <0x10>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x90000 0x1000>; - }; - - fman1_tx_0x28: port@a8000 { - cell-index = <0x28>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa8000 0x1000>; - }; - - fman1_tx_0x29: port@a9000 { - cell-index = <0x29>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa9000 0x1000>; - }; - - fman1_tx_0x2a: port@aa000 { - cell-index = <0x2a>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xaa000 0x1000>; - }; - - fman1_tx_0x2b: port@ab000 { - cell-index = <0x2b>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xab000 0x1000>; - }; - - fman1_tx_0x2c: port@ac0000 { - cell-index = <0x2c>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xac000 0x1000>; - }; - - fman1_tx_0x30: port@b0000 { - cell-index = <0x30>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xb0000 0x1000>; - }; - - ethernet@e0000 { - compatible = "fsl,fman-dtsec"; - cell-index = <0>; - reg = <0xe0000 0x1000>; - fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>; - tbi-handle = <&tbi5>; - }; - - ethernet@e2000 { - compatible = "fsl,fman-dtsec"; - cell-index = <1>; - reg = <0xe2000 0x1000>; - fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>; - tbi-handle = <&tbi6>; - }; - - ethernet@e4000 { - compatible = "fsl,fman-dtsec"; - cell-index = <2>; - reg = <0xe4000 0x1000>; - fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>; - tbi-handle = <&tbi7>; - }; - - ethernet@e6000 { - compatible = "fsl,fman-dtsec"; - cell-index = <3>; - reg = <0xe6000 0x1000>; - fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>; - tbi-handle = <&tbi8>; - }; - - ethernet@e8000 { - compatible = "fsl,fman-dtsec"; - cell-index = <4>; - reg = <0xf0000 0x1000>; - fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>; - tbi-handle = <&tbi9>; - - ethernet@f0000 { - cell-index = <8>; - compatible = "fsl,fman-xgec"; - reg = <0xf0000 0x1000>; - fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; - }; - - ptp-timer@fe000 { - compatible = "fsl,fman-ptp-timer"; - reg = <0xfe000 0x1000>; - }; - - mdio@f1000 { - compatible = "fsl,fman-xmdio"; - reg = <0xf1000 0x1000>; - interrupts = <101 2 0 0>; - }; -}; diff --git a/MAINTAINERS b/MAINTAINERS index 322e89b13c843..7204a81b86930 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8862,7 +8862,7 @@ M: Madalin Bucur <madalin.bucur@xxxxxxx> R: Sean Anderson <sean.anderson@xxxxxxxx> L: netdev@xxxxxxxxxxxxxxx S: Maintained -F: Documentation/devicetree/bindings/net/fsl-fman.txt +F: Documentation/devicetree/bindings/net/fsl-fman.yaml F: drivers/net/ethernet/freescale/fman FREESCALE QORIQ PTP CLOCK DRIVER -- 2.34.1
