Re: [PATCH v3 11/23] drm/panel: Add support for S6E3HA8 panel driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 18, 2024 at 04:59:45PM GMT, Dzmitry Sankouski wrote:
> Add support for MIPI-DSI based S6E3HA8 AMOLED panel
> driver. This panel has 1440x2960 resolution, 5.8-inch physical
> size, and can be found in starqltechn device.
> Brightness regulation is not yet supported.
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
> ---
>  MAINTAINERS                                   |   1 +
>  drivers/gpu/drm/panel/Kconfig                 |   7 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c | 426 ++++++++++++++++++++++++++
>  4 files changed, 435 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 92a5d0a56353..fae3b8ea9ce4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7154,6 +7154,7 @@ DRM DRIVER FOR SAMSUNG S6E3HA8 PANELS
>  M:	Dzmitry Sankouski <dsankouski@xxxxxxxxx>
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/display/panel/samsung,s6e3ha8.yaml
> +F:	drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
>  
>  DRM DRIVER FOR SITRONIX ST7586 PANELS
>  M:	David Lechner <david@xxxxxxxxxxxxxx>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 2ae0eb0638f3..903fc8c155c0 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -651,6 +651,13 @@ config DRM_PANEL_SAMSUNG_S6E3HA2
>  	depends on BACKLIGHT_CLASS_DEVICE
>  	select VIDEOMODE_HELPERS
>  
> +config DRM_PANEL_SAMSUNG_S6E3HA8
> +	tristate "Samsung S6E3HA8 DSI video mode panel"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	select VIDEOMODE_HELPERS
> +
>  config DRM_PANEL_SAMSUNG_S6E63J0X03
>  	tristate "Samsung S6E63J0X03 DSI command mode panel"
>  	depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index f0203f6e02f4..71774cc5820a 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D27A1) += panel-samsung-s6d27a1.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0) += panel-samsung-s6d7aa0.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3FA7) += panel-samsung-s6e3fa7.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA8) += panel-samsung-s6e3ha8.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI) += panel-samsung-s6e63m0-spi.o
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> new file mode 100644
> index 000000000000..49d629643171
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> @@ -0,0 +1,426 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> + *  Copyright (c) 2013, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2024 Dzmitry Sankouski <dsankouski@xxxxxxxxx>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/display/drm_dsc.h>
> +#include <drm/display/drm_dsc_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct s6e3ha8 {
> +	struct drm_panel panel;
> +	struct mipi_dsi_device *dsi;
> +	struct drm_dsc_config dsc;
> +	struct gpio_desc *reset_gpio;
> +	struct regulator_bulk_data supplies[3];
> +};
> +
> +static inline
> +struct s6e3ha8 *to_s6e3ha8_amb577px01_wqhd(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct s6e3ha8, panel);
> +}
> +
> +#define s6e3ha8_call_write_func(ret, func) do {	\
> +	ret = (func);				\
> +	if (ret < 0)				\
> +		return ret;			\
> +} while (0)

Please rework the driver to use mipi_dsi_*_multi() family of functions.
Using the mipi_dsi_multi_context should make this wrapper obsolete too.

> +
> +static int s6e3ha8_test_key_on_lvl1(struct mipi_dsi_device *dsi)
> +{
> +	static const u8 d[] = { 0x9f, 0xa5, 0xa5 };
> +
> +	return mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));
> +	return 0;

Ugh. So which return is it?

> +}
> +

[...]
> +static int s6e3ha8_power_on(struct s6e3ha8 *ctx)
> +{
> +	int ret;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);

Inline this function, it's just regulator_bulk_enable() in the end.

> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int s6e3ha8_power_off(struct s6e3ha8 *ctx)
> +{
> +	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +}
> +
> +static void s6e3ha8_amb577px01_wqhd_reset(struct s6e3ha8 *ctx)
> +{
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +	usleep_range(5000, 6000);
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> +	usleep_range(5000, 6000);
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +	usleep_range(5000, 6000);
> +}
> +
> +static int s6e3ha8_amb577px01_wqhd_on(struct s6e3ha8 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	s6e3ha8_test_key_on_lvl1(dsi);
> +	s6e3ha8_test_key_on_lvl2(dsi);
> +
> +	ret = mipi_dsi_compression_mode(dsi, true);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set compression mode: %d\n", ret);
> +		return ret;
> +	}

Interesting, compression mode is being set before the PPS programming?

> +
> +	s6e3ha8_test_key_off_lvl2(dsi);
> +
> +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +	usleep_range(5000, 6000);
> +
> +	s6e3ha8_test_key_on_lvl2(dsi);
> +	mipi_dsi_generic_write_seq(dsi, 0xf2, 0x13);
> +	s6e3ha8_test_key_off_lvl2(dsi);
> +
> +	usleep_range(10000, 11000);
> +
> +	s6e3ha8_test_key_on_lvl2(dsi);
> +	mipi_dsi_generic_write_seq(dsi, 0xf2, 0x13);
> +	s6e3ha8_test_key_off_lvl2(dsi);
> +
> +	/* OMOK setting 1 (Initial setting) - Scaler Latch Setting Guide */
> +	s6e3ha8_test_key_on_lvl2(dsi);
> +	mipi_dsi_generic_write_seq(dsi, 0xb0, 0x07);
> +	/* latch setting 1 : Scaler on/off & address setting & PPS setting -> Image update latch */
> +	mipi_dsi_generic_write_seq(dsi, 0xf2, 0x3c, 0x10);
> +	mipi_dsi_generic_write_seq(dsi, 0xb0, 0x0b);
> +	/* latch setting 2 : Ratio change mode -> Image update latch */
> +	mipi_dsi_generic_write_seq(dsi, 0xf2, 0x30);
> +	/* OMOK setting 2 - Seamless setting guide : WQHD */
> +	mipi_dsi_generic_write_seq(dsi, 0x2a, 0x00, 0x00, 0x05, 0x9f); /* CASET */
> +	mipi_dsi_generic_write_seq(dsi, 0x2b, 0x00, 0x00, 0x0b, 0x8f); /* PASET */
> +	mipi_dsi_generic_write_seq(dsi, 0xba, 0x01); /* scaler setup : scaler off */
> +	s6e3ha8_test_key_off_lvl2(dsi);
> +	mipi_dsi_generic_write_seq(dsi, 0x35, 0x00); /* TE Vsync ON */
> +	s6e3ha8_test_key_on_lvl2(dsi);
> +	mipi_dsi_generic_write_seq(dsi, 0xed, 0x4c); /* ERR_FG */
> +	s6e3ha8_test_key_off_lvl2(dsi);
> +	s6e3ha8_test_key_on_lvl3(dsi);
> +	/* FFC Setting 897.6Mbps */
> +	mipi_dsi_generic_write_seq(dsi, 0xc5, 0x0d, 0x10, 0xb4, 0x3e, 0x01);
> +	s6e3ha8_test_key_off_lvl3(dsi);
> +	s6e3ha8_test_key_on_lvl2(dsi);
> +	mipi_dsi_generic_write_seq(dsi, 0xb9,
> +				   0x00, 0xb0, 0x81, 0x09, 0x00, 0x00, 0x00,
> +				   0x11, 0x03); /* TSP HSYNC Setting */
> +	s6e3ha8_test_key_off_lvl2(dsi);
> +	s6e3ha8_test_key_on_lvl2(dsi);
> +	mipi_dsi_generic_write_seq(dsi, 0xb0, 0x03);
> +	mipi_dsi_generic_write_seq(dsi, 0xf6, 0x43);
> +	s6e3ha8_test_key_off_lvl2(dsi);
> +	s6e3ha8_test_key_on_lvl2(dsi);
> +	/* Brightness condition set */
> +	mipi_dsi_generic_write_seq(dsi, 0xca,
> +				   0x07, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
> +				   0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
> +				   0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
> +				   0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
> +				   0x80, 0x80, 0x80, 0x00, 0x00, 0x00);
> +	mipi_dsi_generic_write_seq(dsi, 0xb1, 0x00, 0x0c); /* AID Set : 0% */
> +	mipi_dsi_generic_write_seq(dsi, 0xb5,
> +				   0x19, 0xdc, 0x16, 0x01, 0x34, 0x67, 0x9a,
> +				   0xcd, 0x01, 0x22, 0x33, 0x44, 0x00, 0x00,
> +				   0x05, 0x55, 0xcc, 0x0c, 0x01, 0x11, 0x11,
> +				   0x10); /* MPS/ELVSS Setting */
> +	mipi_dsi_generic_write_seq(dsi, 0xf4, 0xeb, 0x28); /* VINT */
> +	mipi_dsi_generic_write_seq(dsi, 0xf7, 0x03); /* Gamma, LTPS(AID) update */
> +	s6e3ha8_test_key_off_lvl2(dsi);
> +	s6e3ha8_test_key_off_lvl1(dsi);
> +
> +	return 0;
> +}
> +
> +static int s6e3ha8_enable(struct drm_panel *panel)
> +{
> +	struct s6e3ha8 *ctx = to_s6e3ha8_amb577px01_wqhd(panel);
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	int ret;
> +
> +	s6e3ha8_call_write_func(ret, s6e3ha8_test_key_on_lvl1(dsi));
> +	s6e3ha8_call_write_func(ret, mipi_dsi_dcs_set_display_on(dsi));
> +	s6e3ha8_call_write_func(ret, s6e3ha8_test_key_off_lvl1(dsi));
> +
> +	return 0;
> +}
> +
> +static int s6e3ha8_disable(struct drm_panel *panel)
> +{
> +	struct s6e3ha8 *ctx = to_s6e3ha8_amb577px01_wqhd(panel);
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	int ret;
> +
> +	s6e3ha8_call_write_func(ret, s6e3ha8_test_key_on_lvl1(dsi));
> +	s6e3ha8_call_write_func(ret, mipi_dsi_dcs_set_display_off(dsi));
> +	s6e3ha8_call_write_func(ret, s6e3ha8_test_key_off_lvl1(dsi));
> +	msleep(20);
> +
> +	s6e3ha8_call_write_func(ret, s6e3ha8_test_key_on_lvl2(dsi));
> +	s6e3ha8_call_write_func(ret, s6e3ha8_afc_off(dsi));
> +	s6e3ha8_call_write_func(ret, s6e3ha8_test_key_off_lvl2(dsi));
> +
> +	msleep(160);
> +
> +	return 0;
> +}
> +
> +static int s6e3ha8_amb577px01_wqhd_prepare(struct drm_panel *panel)
> +{
> +	struct s6e3ha8 *ctx = to_s6e3ha8_amb577px01_wqhd(panel);
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct device *dev = &dsi->dev;
> +	struct drm_dsc_picture_parameter_set pps;
> +	int ret;
> +
> +	s6e3ha8_power_on(ctx);
> +	msleep(120);
> +	s6e3ha8_amb577px01_wqhd_reset(ctx);
> +	ret = s6e3ha8_amb577px01_wqhd_on(ctx);
> +
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to initialize panel: %d\n", ret);
> +		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +		goto err;
> +	}
> +
> +	drm_dsc_pps_payload_pack(&pps, &ctx->dsc);
> +
> +	s6e3ha8_test_key_on_lvl1(dsi);
> +	ret = mipi_dsi_picture_parameter_set(ctx->dsi, &pps);
> +	if (ret < 0) {
> +		dev_err(panel->dev, "failed to transmit PPS: %d\n", ret);
> +		return ret;
> +	}
> +	s6e3ha8_test_key_off_lvl1(dsi);
> +
> +	ret = mipi_dsi_compression_mode(ctx->dsi, true);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to enable compression mode: %d\n", ret);
> +		return ret;
> +	}

Again?

> +
> +
> +	msleep(28);
> +
> +	return 0;
> +err:
> +	s6e3ha8_power_off(ctx);
> +	return ret;
> +}
> +
> +static int s6e3ha8_amb577px01_wqhd_unprepare(struct drm_panel *panel)
> +{
> +	struct s6e3ha8 *ctx = to_s6e3ha8_amb577px01_wqhd(panel);
> +
> +	return s6e3ha8_power_off(ctx);
> +}
> +
> +static const struct drm_display_mode s6e3ha8_amb577px01_wqhd_mode = {
> +	.clock = (1440 + 116 + 44 + 120) * (2960 + 120 + 80 + 124) * 60 / 1000,
> +	.hdisplay = 1440,
> +	.hsync_start = 1440 + 116,
> +	.hsync_end = 1440 + 116 + 44,
> +	.htotal = 1440 + 116 + 44 + 120,
> +	.vdisplay = 2960,
> +	.vsync_start = 2960 + 120,
> +	.vsync_end = 2960 + 120 + 80,
> +	.vtotal = 2960 + 120 + 80 + 124,
> +	.width_mm = 64,
> +	.height_mm = 132,
> +};
> +
> +static int s6e3ha8_amb577px01_wqhd_get_modes(struct drm_panel *panel,
> +					     struct drm_connector *connector)
> +{
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_duplicate(connector->dev, &s6e3ha8_amb577px01_wqhd_mode);
> +	if (!mode)
> +		return -ENOMEM;
> +
> +	drm_mode_set_name(mode);
> +
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	connector->display_info.width_mm = mode->width_mm;
> +	connector->display_info.height_mm = mode->height_mm;
> +	drm_mode_probed_add(connector, mode);

drm_connector_helper_get_modes_fixed()

> +
> +	return 1;
> +}
> +

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux