This compatible has been used in arch/mips/boot/dts/img/boston.dts for a while but never documented properly. Write a new binding for this device. This also covers old img,boston-clock binding so remove that binding. Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> --- v3: Rename clock and reboot node --- .../devicetree/bindings/clock/img,boston-clock.txt | 31 --------- .../bindings/mfd/img,boston-platform-regs.yaml | 74 ++++++++++++++++++++++ 2 files changed, 74 insertions(+), 31 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt deleted file mode 100644 index 7bc5e9ffb624..000000000000 --- a/Documentation/devicetree/bindings/clock/img,boston-clock.txt +++ /dev/null @@ -1,31 +0,0 @@ -Binding for Imagination Technologies MIPS Boston clock sources. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -The device node must be a child node of the syscon node corresponding to the -Boston system's platform registers. - -Required properties: -- compatible : Should be "img,boston-clock". -- #clock-cells : Should be set to 1. - Values available for clock consumers can be found in the header file: - <dt-bindings/clock/boston-clock.h> - -Example: - - system-controller@17ffd000 { - compatible = "img,boston-platform-regs", "syscon"; - reg = <0x17ffd000 0x1000>; - - clk_boston: clock { - compatible = "img,boston-clock"; - #clock-cells = <1>; - }; - }; - - uart0: uart@17ffe000 { - /* ... */ - clocks = <&clk_boston BOSTON_CLK_SYS>; - }; diff --git a/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml b/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml new file mode 100644 index 000000000000..79cae87c6758 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/img,boston-platform-regs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination Technologies Boston Platform Registers + +maintainers: + - Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> + +properties: + compatible: + items: + - const: img,boston-platform-regs + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + clock-controller: + type: object + + description: Boston Clock Controller Device Node + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/boston-clock.h for the full list of boston + clock IDs. + + properties: + "#clock-cells": + const: 1 + + compatible: + const: img,boston-clock + + required: + - "#clock-cells" + - compatible + + additionalProperties: false + + reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + +required: + - compatible + - reg + - clock-controller + - reboot + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/boston-clock.h> + + plat_regs: system-controller@17ffd000 { + compatible = "img,boston-platform-regs", "syscon", "simple-mfd"; + reg = <0x17ffd000 0x1000>; + + clk_boston: clock-controller { + compatible = "img,boston-clock"; + #clock-cells = <1>; + }; + + reboot: reboot { + compatible = "syscon-reboot"; + regmap = <&plat_regs>; + offset = <0x10>; + mask = <0x10>; + }; + }; -- 2.43.0