[PATCH v3 23/23] arm64: dts: qcom: starqltechn: add new features

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for new features:
- sound (headphones and mics only)
- gpu
- panel
- buttons
- MAX77705 MFD:
   - charger
   - fuelgauge
   - haptic
   - led

Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
---
 .../boot/dts/qcom/sdm845-samsung-starqltechn.dts   | 593 ++++++++++++++++++++-
 1 file changed, 592 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index bad154b1e894..28a5210e22fb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -7,15 +7,40 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
 #include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "sdm845-wcd9340.dtsi"
+
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
 
 / {
 	chassis-type = "handset";
 	model = "Samsung Galaxy S9 SM-G9600";
 	compatible = "samsung,starqltechn", "qcom,sdm845";
 
+	aliases {
+		serial0 = &uart9;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <2150000>;
+		charge-full-design-microamp-hours = <3000000>;
+
+		over-voltage-threshold-microvolt = <4500000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -59,9 +84,199 @@ memory@a1300000 {
 			ftrace-size = <0x40000>;
 			pmsg-size = <0x40000>;
 		};
+
+		/* The rmtfs_mem needs to be guarded due to "XPU limitations"
+		 * it is otherwise possible for an allocation adjacent to the
+		 * rmtfs_mem region to trigger an XPU violation, causing a crash.
+		 */
+		rmtfs_lower_guard: memory@fde00000 {
+			no-map;
+			reg = <0 0xfde00000 0 0x1000>;
+		};
+
+		rmtfs_mem: rmtfs-mem@fde01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xfde01000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		rmtfs_upper_guard: rmtfs-upper-guard@fe001000 {
+			no-map;
+			reg = <0 0xfe001000 0 0x1000>;
+		};
+
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			no-map;
+			reg = <0 0x88f00000 0 0x1c00000>;
+		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0xf00000>;
+			no-map;
+		};
+
+		spss_mem: spss@97700000 {
+			reg = <0 0x97700000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: memory@97800000 {
+			reg = <0 0x97800000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		key-wink {
+			label = "key_wink";
+			gpios = <&pm8998_gpios 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c21 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@60 {
+			compatible = "samsung,s2dos05-pmic";
+			reg = <0x60>;
+
+			regulators {
+				s2dos05_ldo1: ldo1 {
+					regulator-name = "s2dos05-ldo1";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-active-discharge = <1>;
+				};
+
+				s2dos05_ldo2: ldo2 {
+					regulator-name = "s2dos05-ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+				};
+
+				s2dos05_ldo3: ldo3 {
+					regulator-name = "s2dos05-ldo3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+				};
+
+				s2dos05_ldo4: ldo4 {
+					regulator-name = "s2dos05-ldo4";
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <3775000>;
+					regulator-active-discharge = <1>;
+				};
+
+				s2dos05_buck1: buck1 {
+					regulator-name = "s2dos05-buck1";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <2100000>;
+					regulator-active-discharge = <1>;
+				};
+			};
+		};
+	};
+
+	vib_regulator: gpio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "haptic";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	vib_pwm: pwm {
+		#pwm-cells = <2>;
+		compatible = "clk-pwm";
+		clocks = <&gcc GCC_GP1_CLK>;
+		pinctrl-0 = <&motor_pwm_default_state>;
+		pinctrl-1 = <&motor_pwm_suspend_state>;
+		pinctrl-names = "default", "suspend";
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e3ha8";
+		reg = <0>;
+		vci-supply = <&s2dos05_ldo4>;
+		vddr-supply = <&s2dos05_buck1>;
+		vdd3-supply = <&s2dos05_ldo1>;
+		te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sde_dsi_default &sde_te>;
+		pinctrl-1 = <&sde_dsi_suspend &sde_te>;
+		pinctrl-names = "default", "suspend";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
 	};
 };
 
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
 
 &apps_rsc {
 	regulators-0 {
@@ -355,10 +570,72 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &uart9 {
 	status = "okay";
 };
 
+&i2c14 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "maxim,max77705";
+		reg = <0x66>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "max77705_irq";
+		pinctrl-0 = <&chg_int_default>;
+		pinctrl-names = "default";
+
+		leds {
+			compatible = "maxim,max77705-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				label = "red:usr1";
+			};
+
+			led@2 {
+				reg = <2>;
+				label = "green:usr2";
+			};
+
+			led@3 {
+				reg = <3>;
+				label = "blue:usr3";
+			};
+		};
+
+		max77705_charger: charger {
+			compatible = "maxim,max77705-charger";
+			monitored-battery = <&battery>;
+		};
+
+		fuelgauge {
+			compatible = "maxim,max77705-fg";
+			monitored-battery = <&battery>;
+			power-supplies = <&max77705_charger>;
+			rsense = <5>;
+		};
+
+
+		haptic {
+			compatible = "maxim,max77705-haptic";
+			haptic-supply = <&vib_regulator>;
+			pwms = <&vib_pwm 0 50000>;
+		};
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l20a_2p95>;
@@ -373,14 +650,241 @@ &ufs_mem_phy {
 };
 
 &sdhc_2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	pinctrl-names = "default";
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;
 	status = "okay";
 };
 
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&s2dos05_ldo2>;
+		avdd-supply = <&s2dos05_ldo3>;
+
+		pinctrl-0 = <&touch_irq_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/starqltechn/adsp.mbn";
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung Galaxy S9";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio-routing =	"RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2", /* Headset Mic */
+			"AMIC3", "MIC BIAS2", /* FMLeft Tx */
+			"AMIC4", "MIC BIAS2", /* FMRight Tx */
+			"DMIC0", "MIC BIAS1", /* Digital Mic0 */
+			"DMIC5", "MIC BIAS4", /* Digital Mic1 */
+			"DMIC4", "MIC BIAS4", /* Digital Mic2 */
+			"DMIC3", "MIC BIAS3", /* Digital Mic3 */
+			"DMIC2", "MIC BIAS3", /* Digital Mic4 */
+			"DMIC1", "MIC BIAS1"; /* Digital Mic5 */
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 2>; /* AIF2_PB */
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 3>; /* AIF2_CAP */
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 5>; /* AIF3_CAP */
+		};
+	};
+};
+
+&q6afedai {
+	dai@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
+/* Modem/wifi */
+&mss_pil {
+	firmware-name = "qcom/sdm845/starqltechn/mba.mbn",
+			"qcom/sdm845/starqltechn/modem.mbn";
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -408,9 +912,45 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8998_gpios {
+	chg_int_default: chg-int-default-state {
+		pins = "gpio11";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
 
+	sde_dsi_default: sde-dsi-default-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te: sde-te-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";
 		bias-disable;
@@ -439,4 +979,55 @@ sd_card_det_n_state: sd-card-det-n-state {
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	motor_pwm_default_state: motor-pwm-active-state {
+		pins = "gpio57";
+		function = "gcc_gp1";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	motor_pwm_suspend_state: motor-pwm-suspend-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	i2c21_sda_state: i2c21-sda-state {
+		pins = "gpio127";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c21_scl_state: i2c21-scl-state {
+		pins = "gpio128";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touch_irq_state: touch-irq-state {
+		pins = "gpio120";
+		function = "gpio";
+		bias-disable;
+	};
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
 };

-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux