Internal clock of AD719X devices can be made available on MCLK2 pin. Add clock provider to support this functionality. Signed-off-by: Alisa-Dariana Roman <alisa.roman@xxxxxxxxxx> --- drivers/iio/adc/ad7192.c | 89 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c index 940517df5429..90763c14679d 100644 --- a/drivers/iio/adc/ad7192.c +++ b/drivers/iio/adc/ad7192.c @@ -8,6 +8,7 @@ #include <linux/interrupt.h> #include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/device.h> #include <linux/kernel.h> #include <linux/slab.h> @@ -201,6 +202,7 @@ struct ad7192_chip_info { struct ad7192_state { const struct ad7192_chip_info *chip_info; struct clk *mclk; + struct clk_hw int_clk_hw; u16 int_vref_mv; u32 aincom_mv; u32 fclk; @@ -401,6 +403,88 @@ static const char *const ad7192_clock_names[] = { "mclk" }; +static struct ad7192_state *clk_hw_to_ad7192(struct clk_hw *hw) +{ + return container_of(hw, struct ad7192_state, int_clk_hw); +} + +static unsigned long ad7192_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return AD7192_INT_FREQ_MHZ; +} + +static int ad7192_clk_output_is_enabled(struct clk_hw *hw) +{ + struct ad7192_state *st = clk_hw_to_ad7192(hw); + + return st->clock_sel == AD7192_CLK_INT_CO; +} + +static int ad7192_clk_prepare(struct clk_hw *hw) +{ + struct ad7192_state *st = clk_hw_to_ad7192(hw); + int ret; + + st->mode &= ~AD7192_MODE_CLKSRC_MASK; + st->mode |= AD7192_CLK_INT_CO; + + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + if (ret) + return ret; + + st->clock_sel = AD7192_CLK_INT_CO; + + return 0; +} + +static void ad7192_clk_unprepare(struct clk_hw *hw) +{ + struct ad7192_state *st = clk_hw_to_ad7192(hw); + int ret; + + st->mode &= ~AD7192_MODE_CLKSRC_MASK; + st->mode |= AD7192_CLK_INT; + + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + if (ret) + return; + + st->clock_sel = AD7192_CLK_INT; +} + +static const struct clk_ops ad7192_int_clk_ops = { + .recalc_rate = ad7192_clk_recalc_rate, + .is_enabled = ad7192_clk_output_is_enabled, + .prepare = ad7192_clk_prepare, + .unprepare = ad7192_clk_unprepare, +}; + +static int ad7192_register_clk_provider(struct ad7192_state *st) +{ + struct device *dev = &st->sd.spi->dev; + struct clk_init_data init = {}; + int ret; + + if (!IS_ENABLED(CONFIG_COMMON_CLK)) + return 0; + + init.name = devm_kasprintf(dev, GFP_KERNEL, "%s-clk", + fwnode_get_name(dev_fwnode(dev))); + if (!init.name) + return -ENOMEM; + + init.ops = &ad7192_int_clk_ops; + + st->int_clk_hw.init = &init; + ret = devm_clk_hw_register(dev, &st->int_clk_hw); + if (ret) + return ret; + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &st->int_clk_hw); +} + static int ad7192_clock_setup(struct ad7192_state *st) { struct device *dev = &st->sd.spi->dev; @@ -412,6 +496,11 @@ static int ad7192_clock_setup(struct ad7192_state *st) if (ret < 0) { st->clock_sel = AD7192_CLK_INT; st->fclk = AD7192_INT_FREQ_MHZ; + + ret = ad7192_register_clk_provider(st); + if (ret) + return dev_err_probe(dev, ret, + "Failed to register clock provider\n"); } else { st->clock_sel = AD7192_CLK_EXT_MCLK1_2 + ret; -- 2.34.1