On Mon, 17 Jun 2024 20:32:14 +0200, Francesco Dolcini wrote: > From: João Paulo Gonçalves <joao.goncalves@xxxxxxxxxxx> > > Add devicetree bindings for Texas Instruments ADS1119 16-bit ADC > with I2C interface. > > Datasheet: https://www.ti.com/lit/gpn/ads1119 > Signed-off-by: João Paulo Gonçalves <joao.goncalves@xxxxxxxxxxx> > Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> > Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > --- > v3: > - add avdd and dvdd supplies > - add Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx > > v2: > - add diff-channels and single-channel > - add XOR check to make diff/single channel property required > - add interrupts, reset-gpios and vref-supply to the example > - fix missing additionalProperties/unevaluatedProperties warning in channels > - remove ti,gain and ti,datarate as they aren't fixed hw properties > - remove unnecessary | > --- > .../bindings/iio/adc/ti,ads1119.yaml | 155 ++++++++++++++++++ > MAINTAINERS | 7 + > 2 files changed, 162 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml: single-channel: missing type definition doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240617183215.4080-2-francesco@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.