Re: [PATCH v1 7/9] riscv: dts: add initial SpacemiT K1 SoC device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 17, 2024 at 08:49:57PM +0800, Jisheng Zhang wrote:
> On Mon, Jun 17, 2024 at 01:20:52AM +0800, Yangyu Chen wrote:
> > Banana Pi BPI-F3 motherboard is powered by SpacemiT K1[1].
> > 
> > Key features:
> > - 4 cores per cluster, 2 clusters on chip
> > - UART IP is Intel XScale UART
> > 
> > Some key considerations:
> > - ISA string is inferred from vendor documentation[2]
> > - Cluster topology is inferred from datasheet[1] and L2 in vendor dts[3]
> > - No coherent DMA on this board
> >     Inferred by taking vendor ethernet and MMC drivers to the mainline
> >     kernel. Without dma-noncoherent in soc node, the driver fails.
> > - No cache nodes now
> >     The parameters from vendor dts are likely to be wrong. It has 512
> >     sets for a 32KiB L1 Cache. In this case, each set is 64B in size.
> >     When the size of the cache line is 64B, it is a directly mapped
> >     cache rather than a set-associative cache, the latter is commonly
> >     used. Thus, I didn't use the parameters from vendor dts.
> > 
> > Currently only support booting into console with only uart, other
> > features will be added soon later.
> 
> Hi Yangyu,
> 
> Per recent practice of cv1800b and th1520 upstream, I think a complete
> initial support would include pinctrl, clk and reset, I have received
> the complains from the community. So can you please bring the pinctrl
> clk  and reset at the same time?

What sort of complaints have you got? That the support is too minimal to
be useful?

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux