The USB1 instance of USB controller on AM62P is different from the USB1 instance of USB controller on J722S. Thus, move the USB1 instance from the shared "k3-am62p-j722s-common-main.dtsi" file to the AM62p specific "k3-am62p-main.dtsi" file. Include "k3-am62p-main.dtsi" in "k3-am62p.dtsi". Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> Acked-by: Roger Quadros <rogerq@xxxxxxxxxx> --- v6: https://lore.kernel.org/r/20240612132409.2477888-3-s-vadapalli@xxxxxx/ No changes since v6. .../dts/ti/k3-am62p-j722s-common-main.dtsi | 26 -------------- arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 34 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am62p.dtsi | 3 ++ 3 files changed, 37 insertions(+), 26 deletions(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi index ff97e4a59e3b..870c95081ef5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi @@ -662,32 +662,6 @@ usb0: usb@31000000 { }; }; - usbss1: usb@f910000 { - compatible = "ti,am62-usb"; - reg = <0x00 0x0f910000 0x00 0x800>, - <0x00 0x0f918000 0x00 0x400>; - clocks = <&k3_clks 162 3>; - clock-names = "ref"; - ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>; - #address-cells = <2>; - #size-cells = <2>; - power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; - ranges; - status = "disabled"; - - usb1: usb@31100000 { - compatible = "snps,dwc3"; - reg = <0x00 0x31100000 0x00 0x50000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ - <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ - interrupt-names = "host", "peripheral"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - snps,usb2-gadget-lpm-disable; - snps,usb2-lpm-disable; - }; - }; - fss: bus@fc00000 { compatible = "simple-bus"; reg = <0x00 0x0fc00000 0x00 0x70000>; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi new file mode 100644 index 000000000000..9caab7db5440 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree file for the AM62P MAIN domain peripherals + * + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + usbss1: usb@f910000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f910000 0x00 0x800>, + <0x00 0x0f918000 0x00 0x400>; + clocks = <&k3_clks 162 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + ranges; + status = "disabled"; + + usb1: usb@31100000 { + compatible = "snps,dwc3"; + reg = <0x00 0x31100000 0x00 0x50000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,usb2-gadget-lpm-disable; + snps,usb2-lpm-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi index 2d11c80107b5..75a15c368c11 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi @@ -123,3 +123,6 @@ cbass_wakeup: bus@b00000 { #include "k3-am62p-j722s-common-main.dtsi" #include "k3-am62p-j722s-common-mcu.dtsi" #include "k3-am62p-j722s-common-wakeup.dtsi" + +/* Include AM62P specific peripherals */ +#include "k3-am62p-main.dtsi" -- 2.40.1
