Re: [PATCH v4 2/2] serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/14/24 04:47, Andy Shevchenko wrote:
On Thu, Jun 13, 2024 at 10:26 AM Hui Wang <hui.wang@xxxxxxxxxxxxx> wrote:

Some boards connect a GPIO to the reset pin, and the reset pin needs
to be setup correctly before accessing the chip.
set up
Got it.
Add a function to handle the chip reset. If the reset-gpios is defined
in the DT, do hardware reset through this GPIO, othwerwise do software
otherwise
Got it.
reset as before.
...

+               /* The minimum reset pulse width is 3 us. */
+               usleep_range(5, 10);
Simply use fsleep() and it will take care of the sane API to be called.
OK, Thanks.

+               gpiod_set_value_cansleep(reset_gpio, 0); /* Deassert GPIO */




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux