Add three overlays to disable the eth phy, rtc, and spi nor. These overlays will be used to disable device tree nodes for components that are optionally not populated. v3: - Explain the logic behind adding the overlays in commit messages v2: - Add build time tests in makefile Nathan Morrisson (4): arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable spi nor arch/arm64/boot/dts/ti/Makefile | 17 +++++++++++++++++ .../boot/dts/ti/k3-am64-phycore-som.dtsi | 2 +- .../ti/k3-am6xx-phycore-disable-eth-phy.dtso | 19 +++++++++++++++++++ .../dts/ti/k3-am6xx-phycore-disable-rtc.dtso | 15 +++++++++++++++ .../ti/k3-am6xx-phycore-disable-spi-nor.dtso | 15 +++++++++++++++ 5 files changed, 67 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso -- 2.25.1
