Re: [PATCH v2 5/8] drm/msm/dpu: rework vsync_source handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Maybe retitle this to something that more closely resembles "remove unset
is_te_using_watchdog_timer field"?

On 2024-06-13 20:05:08, Dmitry Baryshkov wrote:
> The struct msm_display_info has is_te_using_watchdog_timer field which
> is neither used anywhere nor is flexible enough to specify different

Well, it's "used", but not "set" (to anything other than the zero-initialized
default). s/used/set?

> sources. Replace it with the field specifying the vsync source using
> enum dpu_vsync_source.
> 
> Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

Patch itself is fine, just think the title could be clearer:

Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 5 +----
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 5 ++---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 2 ++
>  3 files changed, 5 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index bd37a56b4d03..b147f8814a18 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -743,10 +743,7 @@ static void _dpu_encoder_update_vsync_source(struct dpu_encoder_virt *dpu_enc,
>  		vsync_cfg.pp_count = dpu_enc->num_phys_encs;
>  		vsync_cfg.frame_rate = drm_mode_vrefresh(&dpu_enc->base.crtc->state->adjusted_mode);
>  
> -		if (disp_info->is_te_using_watchdog_timer)
> -			vsync_cfg.vsync_source = DPU_VSYNC_SOURCE_WD_TIMER_0;
> -		else
> -			vsync_cfg.vsync_source = DPU_VSYNC_SOURCE_GPIO_0;
> +		vsync_cfg.vsync_source = disp_info->vsync_source;
>  
>  		hw_mdptop->ops.setup_vsync_source(hw_mdptop, &vsync_cfg);
>  
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> index 76be77e30954..cb59bd4436f4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> @@ -26,15 +26,14 @@
>   * @h_tile_instance:    Controller instance used per tile. Number of elements is
>   *                      based on num_of_h_tiles
>   * @is_cmd_mode		Boolean to indicate if the CMD mode is requested
> - * @is_te_using_watchdog_timer:  Boolean to indicate watchdog TE is
> - *				 used instead of panel TE in cmd mode panels
> + * @vsync_source:	Source of the TE signal for DSI CMD devices
>   */
>  struct msm_display_info {
>  	enum dpu_intf_type intf_type;
>  	uint32_t num_of_h_tiles;
>  	uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY];
>  	bool is_cmd_mode;
> -	bool is_te_using_watchdog_timer;
> +	enum dpu_vsync_source vsync_source;
>  };
>  
>  /**
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 1955848b1b78..e9991f3756d4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -543,6 +543,8 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev,
>  
>  		info.is_cmd_mode = msm_dsi_is_cmd_mode(priv->dsi[i]);
>  
> +		info.vsync_source = DPU_VSYNC_SOURCE_GPIO_0;
> +
>  		encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DSI, &info);
>  		if (IS_ERR(encoder)) {
>  			DPU_ERROR("encoder init failed for dsi display\n");
> 
> -- 
> 2.39.2
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux