Add INA238 power monitor for Harma fan board.
Signed-off-by: Peter Yin <peteryin.openbmc@xxxxxxxxx>
---
.../dts/aspeed/aspeed-bmc-facebook-harma.dts | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 06c8b5ff1125..05020e23a901 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -198,6 +198,30 @@ pwm@5e{
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
};
&i2c1 {
@@ -224,6 +248,30 @@ pwm@5e{
#address-cells = <1>;
#size-cells = <0>;
};
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
};
&i2c3 {
--
2.25.1
