On Thu, Jun 13, 2024 at 11:11:05AM +0200, Krzysztof Kozlowski wrote: > On 13/06/2024 09:45, Konrad Dybcio wrote: > > > > > > On 6/11/24 16:25, Krzysztof Kozlowski wrote: > >> The SWR2 Soundwire instance has 1 output and 4 input ports, so for the > >> headset recording (via the WCD9385 codec and the TX macro codec) we want > >> to use the next DAI, not the first one (see qcom,dout-ports and > >> qcom,din-ports for soundwire@6d30000 node). > >> > >> Original code was copied from other devices like SM8450 and SM8550. On > >> the SM8450 this was a correct setting, however on the SM8550 this worked > >> probably only by coincidence, because the DTS defined no output ports on > >> SWR2 Soundwire. > > > > Planning to send a fix for that? > > > > Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> > > Not really, because microphone works on these targets and changing it > would require testing. I don't have boards suitable for testing, so > let's just leave it. If you provide instructions, I can test microphones on SM8450 HDK. -- With best wishes Dmitry
