On Tue, 4 Jun 2024 at 06:38, Stephen Boyd <sboyd@xxxxxxxxxx> wrote: > > Add test managed wrappers for of_overlay_apply() that automatically > removes the overlay when the test is finished. This API is intended for > use by KUnit tests that test code which relies on 'struct device_node's > and of_*() APIs. > > KUnit tests will call of_overlay_apply_kunit() to load an overlay that's > been built into the kernel image. When the test is complete, the overlay > will be removed. > > This has a few benefits: > > 1) It keeps the tests hermetic because the overlay is removed when the > test is complete. Tests won't even be aware that an overlay was > loaded in another test. > > 2) The overlay code can live right next to the unit test that loads it. > The overlay and the unit test can be compiled into one kernel module > if desired. > > 3) We can test different device tree configurations by loading > different overlays. The overlays can be written for a specific test, > and there can be many of them loaded per-test without needing to jam > all possible combinations into one DTB. > > 4) It also allows KUnit to test device tree dependent code on any > architecture, not just UML. This allows KUnit tests to test > architecture specific device tree code. > > There are some potential pitfalls though. Test authors need to be > careful to not overwrite properties in the live tree. The easiest way to > do this is to add and remove nodes with a 'kunit-' prefix, almost > guaranteeing that the same node won't be present in the tree loaded at > boot. > > Suggested-by: Rob Herring <robh@xxxxxxxxxx> > Cc: Rob Herring <robh@xxxxxxxxxx> > Cc: Saravana Kannan <saravanak@xxxxxxxxxx> > Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx> > Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxx> > --- This looks good to me. I was a little confused at first by some of the wrapper names: in particular that of_overlay_fdt_apply_kunit() is applying the overlay immediately, and deferring a cleanup action, but of_node_put_kunit() is not doing anything immediately, and deferring the put action. My feeling is that the ideal thing would be to have wrappers for all of the of_* functions which return a node which needs to be 'put', and have those wrappers add an of_node_put() action. You could then have of_node_put_kunit() provide a way to trigger that action early. But that seems like it'd be a lot of work and generate a lot of wrappers we otherwise wouldn't need, so this seems an okay compromise to be able to keep using the existing of_ functions. The documentation / comments help make this more clear, too. So, no actual problems. (Assuming you don't want to put the documentation under the devicetree rather than under KUnit -- it can go either way.) Reviewed-by: David Gow <davidgow@xxxxxxxxxx> Thanks, -- David > Documentation/dev-tools/kunit/api/index.rst | 11 ++ > Documentation/dev-tools/kunit/api/of.rst | 13 +++ > drivers/of/Makefile | 1 + > drivers/of/of_kunit_helpers.c | 74 +++++++++++++ > include/kunit/of.h | 115 ++++++++++++++++++++ > 5 files changed, 214 insertions(+) > create mode 100644 Documentation/dev-tools/kunit/api/of.rst > create mode 100644 drivers/of/of_kunit_helpers.c > create mode 100644 include/kunit/of.h > > diff --git a/Documentation/dev-tools/kunit/api/index.rst b/Documentation/dev-tools/kunit/api/index.rst > index 2d8f756aab56..282befa17edf 100644 > --- a/Documentation/dev-tools/kunit/api/index.rst > +++ b/Documentation/dev-tools/kunit/api/index.rst > @@ -9,11 +9,15 @@ API Reference > test > resource > functionredirection > + of > > > This page documents the KUnit kernel testing API. It is divided into the > following sections: > > +Core KUnit API > +============== > + > Documentation/dev-tools/kunit/api/test.rst > > - Documents all of the standard testing API > @@ -25,3 +29,10 @@ Documentation/dev-tools/kunit/api/resource.rst > Documentation/dev-tools/kunit/api/functionredirection.rst > > - Documents the KUnit Function Redirection API > + > +Driver KUnit API > +================ > + > +Documentation/dev-tools/kunit/api/of.rst > + > + - Documents the KUnit device tree (OF) API > diff --git a/Documentation/dev-tools/kunit/api/of.rst b/Documentation/dev-tools/kunit/api/of.rst > new file mode 100644 > index 000000000000..cb4193dcddbb > --- /dev/null > +++ b/Documentation/dev-tools/kunit/api/of.rst > @@ -0,0 +1,13 @@ > +.. SPDX-License-Identifier: GPL-2.0 > + > +==================== > +Device Tree (OF) API > +==================== > + > +The KUnit device tree API is used to test device tree (of_*) dependent code. > + > +.. kernel-doc:: include/kunit/of.h > + :internal: > + > +.. kernel-doc:: drivers/of/of_kunit_helpers.c > + :export: > diff --git a/drivers/of/Makefile b/drivers/of/Makefile > index 251d33532148..2ae909adde49 100644 > --- a/drivers/of/Makefile > +++ b/drivers/of/Makefile > @@ -19,6 +19,7 @@ obj-y += kexec.o > endif > endif > > +obj-$(CONFIG_KUNIT) += of_kunit_helpers.o > obj-$(CONFIG_OF_KUNIT_TEST) += of_test.o > > obj-$(CONFIG_OF_UNITTEST) += unittest-data/ > diff --git a/drivers/of/of_kunit_helpers.c b/drivers/of/of_kunit_helpers.c > new file mode 100644 > index 000000000000..8a09132e32a8 > --- /dev/null > +++ b/drivers/of/of_kunit_helpers.c > @@ -0,0 +1,74 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Test managed device tree APIs > + */ > + > +#include <linux/of.h> > +#include <linux/of_fdt.h> > + > +#include <kunit/of.h> > +#include <kunit/test.h> > +#include <kunit/resource.h> > + > +#if defined(CONFIG_OF_OVERLAY) && defined(CONFIG_OF_EARLY_FLATTREE) > + > +static void of_overlay_fdt_apply_kunit_exit(void *ovcs_id) > +{ > + of_overlay_remove(ovcs_id); > +} > + > +/** > + * of_overlay_fdt_apply_kunit() - Test managed of_overlay_fdt_apply() > + * @test: test context > + * @overlay_fdt: device tree overlay to apply > + * @overlay_fdt_size: size in bytes of @overlay_fdt > + * @ovcs_id: identifier of overlay, used to remove the overlay > + * > + * Just like of_overlay_fdt_apply(), except the overlay is managed by the test > + * case and is automatically removed with of_overlay_remove() after the test > + * case concludes. > + * > + * Return: 0 on success, negative errno on failure > + */ > +int of_overlay_fdt_apply_kunit(struct kunit *test, void *overlay_fdt, > + u32 overlay_fdt_size, int *ovcs_id) > +{ > + int ret; > + int *copy_id; > + > + copy_id = kunit_kmalloc(test, sizeof(*copy_id), GFP_KERNEL); > + if (!copy_id) > + return -ENOMEM; > + > + ret = of_overlay_fdt_apply(overlay_fdt, overlay_fdt_size, > + ovcs_id, NULL); > + if (ret) > + return ret; > + > + *copy_id = *ovcs_id; > + > + return kunit_add_action_or_reset(test, of_overlay_fdt_apply_kunit_exit, > + copy_id); > +} > +EXPORT_SYMBOL_GPL(of_overlay_fdt_apply_kunit); > + > +#endif > + > +KUNIT_DEFINE_ACTION_WRAPPER(of_node_put_wrapper, of_node_put, struct device_node *); > + > +/** > + * of_node_put_kunit() - Test managed of_node_put() > + * @test: test context > + * @node: node to pass to `of_node_put()` > + * > + * Just like of_node_put(), except the node is managed by the test case and is > + * automatically put with of_node_put() after the test case concludes. > + */ > +void of_node_put_kunit(struct kunit *test, struct device_node *node) > +{ > + if (kunit_add_action(test, of_node_put_wrapper, node)) { > + KUNIT_FAIL(test, > + "Can't allocate a kunit resource to put of_node\n"); > + } > +} > +EXPORT_SYMBOL_GPL(of_node_put_kunit); > diff --git a/include/kunit/of.h b/include/kunit/of.h > new file mode 100644 > index 000000000000..48d4e70c9666 > --- /dev/null > +++ b/include/kunit/of.h > @@ -0,0 +1,115 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#ifndef _KUNIT_OF_H > +#define _KUNIT_OF_H > + > +#include <kunit/test.h> > + > +struct device_node; > + > +#ifdef CONFIG_OF > + > +void of_node_put_kunit(struct kunit *test, struct device_node *node); > + > +#else > + > +static inline > +void of_node_put_kunit(struct kunit *test, struct device_node *node) > +{ > + kunit_skip(test, "requires CONFIG_OF"); > +} > + > +#endif /* !CONFIG_OF */ > + > +#if defined(CONFIG_OF) && defined(CONFIG_OF_OVERLAY) && defined(CONFIG_OF_EARLY_FLATTREE) > + > +int of_overlay_fdt_apply_kunit(struct kunit *test, void *overlay_fdt, > + u32 overlay_fdt_size, int *ovcs_id); > +#else > + > +static inline int > +of_overlay_fdt_apply_kunit(struct kunit *test, void *overlay_fdt, > + u32 overlay_fdt_size, int *ovcs_id) > +{ > + kunit_skip(test, "requires CONFIG_OF and CONFIG_OF_OVERLAY and CONFIG_OF_EARLY_FLATTREE for root node"); > + return -EINVAL; > +} > + > +#endif > + > +/** > + * __of_overlay_apply_kunit() - Test managed of_overlay_fdt_apply() variant > + * @test: test context > + * @overlay_begin: start address of overlay to apply > + * @overlay_end: end address of overlay to apply > + * > + * This is mostly internal API. See of_overlay_apply_kunit() for the wrapper > + * that makes this easier to use. > + * > + * Similar to of_overlay_fdt_apply(), except the overlay is managed by the test > + * case and is automatically removed with of_overlay_remove() after the test > + * case concludes. > + * > + * Return: 0 on success, negative errno on failure > + */ > +static inline int __of_overlay_apply_kunit(struct kunit *test, > + u8 *overlay_begin, > + const u8 *overlay_end) > +{ > + int unused; > + > + return of_overlay_fdt_apply_kunit(test, overlay_begin, > + overlay_end - overlay_begin, > + &unused); > +} > + > +/** > + * of_overlay_apply_kunit() - Test managed of_overlay_fdt_apply() for built-in overlays > + * @test: test context > + * @overlay_name: name of overlay to apply > + * > + * This macro is used to apply a device tree overlay built with the > + * cmd_dt_S_dtbo rule in scripts/Makefile.lib that has been compiled into the > + * kernel image or KUnit test module. The overlay is automatically removed when > + * the test is finished. > + * > + * Unit tests that need device tree nodes should compile an overlay file with > + * @overlay_name\.dtbo.o in their Makefile along with their unit test and then > + * load the overlay during their test. The @overlay_name matches the filename > + * of the overlay without the dtbo filename extension. If CONFIG_OF_OVERLAY is > + * not enabled, the @test will be skipped. > + * > + * In the Makefile > + * > + * .. code-block:: none > + * > + * obj-$(CONFIG_OF_OVERLAY_KUNIT_TEST) += overlay_test.o kunit_overlay_test.dtbo.o > + * > + * In the test > + * > + * .. code-block:: c > + * > + * static void of_overlay_kunit_of_overlay_apply(struct kunit *test) > + * { > + * struct device_node *np; > + * > + * KUNIT_ASSERT_EQ(test, 0, > + * of_overlay_apply_kunit(test, kunit_overlay_test)); > + * > + * np = of_find_node_by_name(NULL, "test-kunit"); > + * KUNIT_EXPECT_NOT_ERR_OR_NULL(test, np); > + * of_node_put(np); > + * } > + * > + * Return: 0 on success, negative errno on failure. > + */ > +#define of_overlay_apply_kunit(test, overlay_name) \ > +({ \ > + extern uint8_t __dtbo_##overlay_name##_begin[]; \ > + extern uint8_t __dtbo_##overlay_name##_end[]; \ > + \ > + __of_overlay_apply_kunit((test), \ > + __dtbo_##overlay_name##_begin, \ > + __dtbo_##overlay_name##_end); \ > +}) > + > +#endif > -- > https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/ > https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git >
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature